*unite.txt* Unite and create user interfaces.
Version: 6.3
Author: Shougo <Shougo.Matsu@gmail.com>
Documentation Author: ujihisa <ujihisa at gmail com>
License: MIT license {{{
Permission is hereby granted, free of charge, to any person obtaining
a copy of this software and associated documentation files (the
"Software"), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish,
distribute, sublicense, and/or sell copies of the Software, and to
permit persons to whom the Software is furnished to do so, subject to
the following conditions:
The above copyright notice and this permission notice shall be included
in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
}}}
CONTENTS *unite-contents*
Introduction |unite-introduction|
Usage |unite-usage|
Install |unite-install|
Configuration Examples |unite-examples|
Interface |unite-interface|
Commands |unite-commands|
Variables |unite-variables|
Sources variables |unite-sources-variables|
Kind variables |unite-kind-variables|
Filter variables |unite-filter-variables|
Key mappings |unite-key-mappings|
Functions |unite-functions|
Options |unite-options|
Sources |unite-sources|
Kinds |unite-kinds|
Actions |unite-actions|
Filters |unite-filters|
Create source |unite-create-source|
Create kind |unite-create-kind|
Create filter |unite-create-filter|
External source |unite-external-sources|
FAQ |unite-faq|
==============================================================================
INTRODUCTION *unite-introduction*
*unite* or *unite.vim* is a common extensible interface for searching and
displaying lists of information from within vim. It can display and search
through any arbitrary source, from files and directories to buffers and
registers.
The difference between |unite| and similar plug-ins like |fuzzyfinder|,
|ctrl-p| or |ku| is, |unite| provides a standard interface for any sources.
The API is flexible enough that it can be used to build your own interface.
==============================================================================
USAGE *unite-usage*
To browse a list of currently open buffers like |:ls| command.
>
:Unite buffer
<
To browse a list of files in the current working directory.
>
:Unite file
<
To browse recursive list of all the files under the current working
directory.
>
:Unite file_rec
<
Or you can combine sources, to browse files and buffers.
>
:Unite file buffer
<
There are a number of command line flags (see |unite-options|), for
example to set an initial search term (foo) to filter files search.
>
:Unite -input=foo file
<
You don't have to use |:execute| for dynamic arguments.
You can use evaluation cmdline by ``.
Note: In the evaluation, The special characters(spaces, "\" and ":")
are escaped automatically.
>
:Unite -buffer-name=search%`bufnr('%')` line:forward:wrap<CR>
<
Invoking unite will create a horizontal split buffer by default.
>
:Unite file
<
This example lists all the files in the current directory. You can select one
in the unite window by moving the cursor with normal Vim navigation,
e.g. j and k. Pressing Enter on a candidate and it will open it in a new
buffer.
Enter will trigger the default action, which in the case of "file" is open,
however alternate actions can be defined. These alternative actions can be
invoked with <Tab>. See also |unite-actions| to read on about different
actions.
You can also narrow down the list of candidates with a keyword. By entering
insert mode in a unite window, the cursor will jump to the unite prompt (" ")
at the top of the window. Typing at the unite prompt will filter the candidate
list.
You can also use the wild card "*" as an arbitrary character sequence.
>
*hisa
<
This example matches hisa, ujihisa, or ujihisahisa.
Two consecutive wild cards recursively match directories.
>
**/foo
<
This example would match bar/foo or buzz/bar/foo.
Note: The unite action |unite-source-file_rec| (read: file recursive) does a
recursive file search by default without the need to set wildcards.
Multiple keywords can be used to narrow down the candidates. They are
separated by either a space " " or a pipe "|", and act like a logical AND.
>
foo bar
foo|bar
<
This example matches "foobar" and "foobazbar", but not "foobaz"
Specify negative conditions with a bang "!".
>
foo !bar
<
This example matches candidates that contain "foo" but not "bar".
Specify command execution after the action with a ":".
>
" Jump to line 3.
foo :3
" Search for "bar".
foo :/bar
" Execute :diffthis command.
foo :diffthis
<
See |unite_default_key_mappings| for other actions.
==============================================================================
INSTALL *unite-install*
Install the distributed files into your Vim script directory which is usually
~/.vim/, or $HOME/vimfiles on Windows. You should consider to use one of the
famous package managers for Vim like vundle or neobundle to install the
plugin.
After installation you can run unite with the |:Unite| command and append the
sources to the command you wish to select from as parameters. However, it's a
pain in the ass to run the command explicitly every time, so I recommend you
set a key mapping for the command.
Note: MRU sources are split. To use mru sources, you must install |neomru|.
https://github.com/Shougo/neomru.vim
==============================================================================
EXAMPLES *unite-examples*
With all of the flexibility and power that unite gives you it is recommended
that you create some normal mode mappings for invoking unite in your .vimrc
file.
A simple mapping that will configure <leader>-f to browse for a file in the
current working directory:
>
nnoremap <leader>f :<C-u>Unite file<CR>
<
The same mapping, but instead start in insert mode so any typing will filter
the candidate list:
>
nnoremap <leader>f :<C-u>Unite -start-insert file<CR>
<
The popular recursive file search, starting insert automatically and using
fuzzy file matching:
>
call unite#filters#matcher_default#use(['matcher_fuzzy'])
nnoremap <leader>r :<C-u>Unite -start-insert file_rec<CR>
<
Note: with large projects this may cause some performance problems. Normally
it is recommended to use |unite-source-file_rec/async| source, which requires
|vimproc|. The mapping might look something like this:
>
nnoremap <leader>r :<C-u>Unite -start-insert file_rec/async:!<CR>
<
Since you can pass in multiple sources into unite you can easily create a
mapping that will open up a unite pane with the sources you frequently use.
To see buffers, recent files then bookmarks:
>
nnoremap <silent> <leader>b :<C-u>Unite buffer bookmark<CR>
<
Much more sophisticated mappings can be configured to quickly find what you
need in vim.
More advanced configuration example:
>
" The prefix key.
nnoremap [unite] <Nop>
nmap f [unite]
nnoremap <silent> [unite]c :<C-u>UniteWithCurrentDir
\ -buffer-name=files buffer bookmark file<CR>
nnoremap <silent> [unite]b :<C-u>UniteWithBufferDir
\ -buffer-name=files buffer bookmark file<CR>
nnoremap <silent> [unite]r :<C-u>Unite
\ -buffer-name=register register<CR>
nnoremap <silent> [unite]o :<C-u>Unite outline<CR>
nnoremap <silent> [unite]f
\ :<C-u>Unite -buffer-name=resume resume<CR>
nnoremap <silent> [unite]ma
\ :<C-u>Unite mapping<CR>
nnoremap <silent> [unite]me
\ :<C-u>Unite output:message<CR>
nnoremap [unite]f :<C-u>Unite source<CR>
nnoremap <silent> [unite]s
\ :<C-u>Unite -buffer-name=files -no-split
\ jump_point file_point buffer_tab
\ file_rec:! file file/new<CR>
" Start insert.
"call unite#custom#profile('default', 'context', {
"\ 'start_insert': 1
"\ })
" Like ctrlp.vim settings.
"call unite#custom#profile('default', 'context', {
"\ 'start_insert': 1,
"\ 'winheight': 10,
"\ 'direction': 'botright',
"\ })
autocmd FileType unite call s:unite_my_settings()
function! s:unite_my_settings()"{{{
" Overwrite settings.
imap <buffer> jj <Plug>(unite_insert_leave)
"imap <buffer> <C-w> <Plug>(unite_delete_backward_path)
imap <buffer><expr> j unite#smart_map('j', '')
imap <buffer> <TAB> <Plug>(unite_select_next_line)
imap <buffer> <C-w> <Plug>(unite_delete_backward_path)
imap <buffer> ' <Plug>(unite_quick_match_default_action)
nmap <buffer> ' <Plug>(unite_quick_match_default_action)
imap <buffer><expr> x
\ unite#smart_map('x', "\<Plug>(unite_quick_match_jump)")
nmap <buffer> x <Plug>(unite_quick_match_jump)
nmap <buffer> <C-z> <Plug>(unite_toggle_transpose_window)
imap <buffer> <C-z> <Plug>(unite_toggle_transpose_window)
nmap <buffer> <C-j> <Plug>(unite_toggle_auto_preview)
nmap <buffer> <C-r> <Plug>(unite_narrowing_input_history)
imap <buffer> <C-r> <Plug>(unite_narrowing_input_history)
nnoremap <silent><buffer><expr> l
\ unite#smart_map('l', unite#do_action('default'))
let unite = unite#get_current_unite()
if unite.profile_name ==# 'search'
nnoremap <silent><buffer><expr> r unite#do_action('replace')
else
nnoremap <silent><buffer><expr> r unite#do_action('rename')
endif
nnoremap <silent><buffer><expr> cd unite#do_action('lcd')
nnoremap <buffer><expr> S unite#mappings#set_current_sorters(
\ empty(unite#mappings#get_current_sorters()) ?
\ ['sorter_reverse'] : [])
" Runs "split" action by <C-s>.
imap <silent><buffer><expr> <C-s> unite#do_action('split')
endfunction"}}}
<
==============================================================================
INTERFACE *unite-interface*
------------------------------------------------------------------------------
COMMANDS *unite-commands*
:Unite [{options}] {sources} *:Unite*
Unite can be invoked with one or more sources. This can be
done by specifying the list on the command line, separated by
spaces. The list of candidates (the matches found in the
source by your filter string) will be ordered in the same
order that you specify the {sources}.
If {sources} are empty, you can input source name and args
manually.
For example:
:Unite file buffer
Will first list the files, then list the buffers.
See also |unite-sources| the available sources.
In case you are already in a unite buffer, the narrowing text
is stored.
Unite can accept a list of strings, separated with ":", after
the name of sources. You must escape ":" and "\" with "\"
in parameters themselves. "::" is an abbreviation argument.
It depends on the sources how the parameters are interpreted.
Examples:
"file:foo:bar": the parameters of source file are
["foo", "bar"].
"file:foo\:bar": the parameter of source file is
["foo:bar"].
"file:foo::bar": the parameters of source file are
["foo", "", "bar"].
{options} are options for a unite buffer: |unite-options|
:UniteWithCurrentDir [{options}] {sources} *:UniteWithCurrentDir*
Equivalent to |:Unite| except that it targets the current
directory for the initial narrowing text.
:UniteWithBufferDir [{options}] {sources} *:UniteWithBufferDir*
Equivalent to |:Unite| except that it targets the buffer's
directory for the initial narrowing text.
:UniteWithProjectDir [{options}] {sources} *:UniteWithProjectDir*
Equivalent to |:Unite| except that it targets the project
directory for the initial narrowing text.
:UniteWithInput [{options}] {sources} *:UniteWithInput*
Equivalent to |:Unite| except that it will prompt the user for
narrowing text before opening the unite buffer.
*:UniteWithInputDirectory*
:UniteWithInputDirectory [{options}] {sources}
Equivalent to |:Unite| except that it will prompt the user for
narrowing directory before opening the unite buffer.
:UniteWithCursorWord [{options}] {sources} *:UniteWithCursorWord*
Equivalent to |:Unite| except that it targets the word under
the cursor for the initial narrowing text.
:UniteResume [{options}] [{buffer-name}] *:UniteResume*
Reuses the unite buffer named {buffer-name} that you opened
previously. Narrowing texts or candidates are
as-is. If {options} are given, context information gets
overridden.
Note: Reuses the last unite buffer you used in current tab if
you skip specifying {buffer-name}.
:UniteClose [{buffer-name}] *:UniteClose*
Closes the unite buffer with {buffer-name}.
Note: Closes the last unite buffer you used in current tab if
you skip specifying {buffer-name}.
:[count]UniteNext [{buffer-name}] *:UniteNext*
Do the default action with the next candidate in the unite
buffer with {buffer-name}.
You can use it like |:cnext|.
:[count]UnitePrevious [{buffer-name}] *:UnitePrevious*
Do the default action with the previous candidates in the
unite buffer with {buffer-name}.
You can use it like |:cprevious|.
:UniteFirst [{buffer-name}] *:UniteFirst*
Do the default action with the first candidate in the unite
buffer with {buffer-name}.
You can use it like |:cfirst|.
:UniteLast [{buffer-name}] *:UniteLast*
Do the default action with the last candidate in the unite
buffer with {buffer-name}.
You can use it like |:clast|.
:UniteDo {command} *:UniteDo*
Executes a {command} for each candidate's default action.
You can use it like |:argdo|.
Example:
Concider a JavaScript file with the code below.
>
/* jshint unused: true */
var variable = 1;
function foo () {
console.log('Hello foo!')
}
function bar () {
console.log('Good bye bar!')
}
<
Apply JsHint (http://jshint.com/) linting tool to the
example.
>
test.js: line 6, col 30, Missing semicolon.
test.js: line 10, col 33, Missing semicolon.
test.js: line 3, col 5, 'variable' is defined but never used.
test.js: line 5, col 10, 'foo' is defined but never used.
test.js: line 9, col 10, 'bar' is defined but never used.
<
Syntastic (https://github.com/scrooloose/syntastic) can
use JsHint to populate the location list with those warnings.
So, use the quick fix external source to populate a Unite
buffer with those issues.
>
:Unite location_list
<
Use "semicolon" as narrowing text so there is only one type of
error.
>
test.js: line 6, col 30, Missing semicolon.
test.js: line 10, col 33, Missing semicolon.
<
Then, use UniteDo to apply a fix to these lines using a single
command.
>
:UniteDo normal! A;
<
Limitations: If the candidates are lines in a file, UniteDo
assumes that either:
- {command} doesn't change the number of lines; or
- candidates are sorted in ascending order by line.
UniteDo might have unexpected behaviour if none of the
two conditions above are met.
The commands of source *:unite-sources-commands*
:UniteBookmarkAdd [{file}] *:UniteBookmarkAdd*
Adds a file to the bookmark list. By default this will also
store the position of the current file.
------------------------------------------------------------------------------
VARIABLES *unite-variables*
*g:unite_force_overwrite_statusline*
g:unite_force_overwrite_statusline
If this variable is 1, unite will overwrite 'statusline'
automatically.
Note: If you want to change 'statusline' in unite buffer, you
must set it to 0.
The default value is 1.
g:unite_ignore_source_files *g:unite_ignore_source_files*
Ignore source filenames (not full path). You can optimize
source initialization.
Note: You cannot use the sources in ignored source files.
>
let g:unite_ignore_source_files = ['function.vim', 'command.vim']
<
The default value is [].
g:unite_quick_match_table *g:unite_quick_match_table*
The table of completion candidates of quick match list,
corresponding the narrowing text.
The default value is complex; so see plugin/unite.vim.
g:unite_data_directory *g:unite_data_directory*
Specify directories to store unite configurations. Used by
both unite itself and its sources. If the directory doesn't
exist, the directory is automatically created. For example
source of file_mru saves the information of the most recent
used files into this directory.
Default value is "$XDG_CACHE_HOME/unite" or
expand("~/.cache/unite"); the absolute path of it.
g:unite_no_default_keymappings *g:unite_no_default_keymappings*
If this variable is 1, unite doesn't set any default key
mappings. Not recommended. You shouldn't set this to 1
unless you have a specific reason.
This variable doesn't exist unless you define it explicitly.
g:unite_redraw_hold_candidates *g:unite_redraw_hold_candidates*
If the number of unite candidates is not greater than this
variable, all the candidates are holded for redrawing.
If lua is enabled, the default value is 20000, otherwise
10000.
g:unite_enable_auto_select *g:unite_enable_auto_select*
If it is 1, unite skip first candidate when cursor is on the
prompt line.
The default value is 1.
*g:unite_restore_alternate_file*
g:unite_restore_alternate_file
Option to restore alternate file after open action. The
unite buffer does not become the alternate file by default.
Default value is 1.
SOURCES VARIABLES *unite-sources-variables*
*g:unite_source_buffer_time_format*
g:unite_source_buffer_time_format
Specify the output format of the last access time of
|unite-source-buffer|. Uses |strftime()| formatting.
The default value is "(%Y/%m/%d %H:%M:%S) ".
*g:unite_source_file_async_command*
g:unite_source_file_async_command
Specify the filelist command and arguments in file/async
source.
The default value is "ls -a".
g:unite_source_bookmark_directory *g:unite_source_bookmark_directory*
Specify the directory where |unite-source-bookmark| writes
its bookmarks.
The default value is |g:unite_data_directory|; '/bookmark'.
*g:unite_source_rec_min_cache_files*
g:unite_source_rec_min_cache_files
Specify the minimum number of files that
|unite-source-file_rec| saves the caches. Any cache isn't
saved if the number of files is less than this value or this
value is 0.
The default value is 100.
*g:unite_source_rec_max_cache_files*
g:unite_source_rec_max_cache_files
Specify the maximum number of files that
|unite-source-file_rec| saves the caches.
The default value is 20000.
*g:unite_source_rec_unit*
g:unite_source_rec_unit
Specify the unit of gather files in |unite-source-file_rec|.
If you increase the value, |unite-source-file_rec| will be
faster but it will block Vim for a long time.
Note: This option does not work in
|unite-source-file_rec/async| source.
The default value is 1000(windows environment), 2000(other).
*g:unite_source_rec_async_command*
g:unite_source_rec_async_command
Specify the filelist command and arguments in file_rec/async
source. It is arguments List.
>
" Using ack-grep as recursive command.
let g:unite_source_rec_async_command =
\ ['ack', '-f', '--nofilter']
" Using ag as recursive command.
let g:unite_source_rec_async_command =
\ ['ag', '--follow', '--nocolor', '--nogroup',
\ '--hidden', '-g', '']
<
The default value is ["find", "-L"] which follows symbolic
links to have the same behaviour as file_rec, and the
args(|g:unite_source_rec_find_args|).
Because, "find" command is fastest.
Note: In windows environment, you must install file list
command and specify the variable.
Note: "cmd.exe" is not supported.
*g:unite_source_rec_find_args*
g:unite_source_rec_find_args
Specify the find arguments in file_rec/async source.
The default value is ['-path', '*/.git/*', '-prune', '-o',
'-type', 'l', '-print'].
*g:unite_source_rec_git_command*
g:unite_source_rec_git_command
Specify the git command in file_rec/git source.
g:unite_source_grep_command *g:unite_source_grep_command*
Set grep command.
The default value is "grep".
*g:unite_source_grep_recursive_opt*
g:unite_source_grep_recursive_opt
Set grep recursive option.
The default value is "-r".
*g:unite_source_grep_default_opts*
g:unite_source_grep_default_opts
Set the default options for grep.
Note: grep output must match the pattern below.
filename:number:pattern
>
let g:unite_source_grep_default_opts = '-iRHn'
<
The default value is "-inH".
*g:unite_source_grep_search_word_highlight*
g:unite_source_grep_search_word_highlight
Specify the search word highlight.
The default value is "Search".
g:unite_source_grep_encoding *g:unite_source_grep_encoding*
Set output encoding of grep command.
The default value is "char".
*g:unite_source_vimgrep_search_word_highlight*
g:unite_source_vimgrep_search_word_highlight
Specify the search word highlight.
The default value is "Search".
g:unite_source_find_command *g:unite_source_find_command*
Set find command.
The default value is "find".
*g:unite_source_find_default_opts*
g:unite_source_find_default_opts
Set the default options for find.
" Follow symlinks
let g:unite_source_find_default_opts = "-L"
The default value is "".
*g:unite_source_find_default_expr*
g:unite_source_find_default_expr
Set the default expression for find.
The default value is "-name ".
*g:unite_source_line_enable_highlight*
g:unite_source_line_enable_highlight
Control whether highlighted in unite buffer.
Note: It is slow.
The default value is 0.
g:unite_source_alias_aliases *g:unite_source_alias_aliases*
Set |unite-source-alias| settings. This variable is a
dictionary. The key is an alias source name, and
the value is a dictionary with the following attributes.
Alias sources are copies of original sources.
If the value items are a string, they will be used as the base
source name.
source (String) (Required)
Base source name.
args (String) (Optional)
Set arguments automatically.
description (String) (Optional)
Description string.
Example:
>
let g:unite_source_alias_aliases = {
\ 'test' : {
\ 'source': 'file_rec',
\ 'args': '~/',
\ },
\ 'b' : 'buffer',
\ }
<
The default value is "{}".
g:unite_source_menu_menus *g:unite_source_menu_menus*
Set |unite-source-menu| settings. This variable is a
dictionary. The keys are menu names and the values are the
following attributes.
candidates (List or Dictionary) (Required)
Menu candidates. If candidates type is a dictionary, keys are
ignored, but you can refer to the map attribute described
below.
file_candidates
(List) (Optional)
Menu candidates for files.
The first item is used for word. The second item is file
path.
command_candidates
(List or Dictionary) (Optional)
Menu candidates for commands.
If this is a Dictionary, the key is used for word. The value
is command name.
If this is a List, the first item is used for word. The
second item is command name.
map (Function) (Optional)
If this attribute is given, candidates are results of
map(key, value).
description (String) (Optional)
Description string.
Example:
>
let g:unite_source_menu_menus = {}
let g:unite_source_menu_menus.test = {
\ 'description' : 'Test menu',
\ }
let g:unite_source_menu_menus.test.candidates = {
\ 'ghci' : 'VimShellInteractive ghci',
\ }
function g:unite_source_menu_menus.test.map(key, value)
return {
\ 'word' : a:key, 'kind' : 'command',
\ 'action__command' : a:value,
\ }
endfunction
let g:unite_source_menu_menus.test2 = {
\ 'description' : 'Test menu2',
\ }
let g:unite_source_menu_menus.test2.command_candidates = {
\ 'python' : 'VimShellInteractive python',
\ }
let g:unite_source_menu_menus.test3 = {
\ 'description' : 'Test menu3',
\ }
let g:unite_source_menu_menus.test3.command_candidates = [
\ ['ruby', 'VimShellInteractive ruby'],
\ ['python', 'VimShellInteractive python'],
\ ]
let g:unite_source_menu_menus.zsh = {
\ 'description' : 'zsh files',
\ }
let g:unite_source_menu_menus.zsh.file_candidates = [
\ ['zshenv' , '~/.zshenv'],
\ ['zshrc' , '~/.zshrc'],
\ ['zplug' , '~/.zplug'],
\ ]
nnoremap <silent> sm :<C-u>Unite menu:test<CR>
<
The default value is "{}".
*g:unite_source_process_enable_confirm*
g:unite_source_process_enable_confirm
When this variable is 1 and a signal is sent to a process via
|unite-source-process| such as KILL, Vim will ask you if you
really want to do that.
The default value is 1.
*g:unite_source_output_shellcmd_colors*
g:unite_source_output_shellcmd_colors
A list of colors correspond to coloring in escape sequence.
0-8 as normal colors, 9-15 as highlight colors.
KIND VARIABLES *unite-kind-variables*
*g:unite_kind_jump_list_after_jump_scroll*
g:unite_kind_jump_list_after_jump_scroll
Number of lines to adjust the cursor location after the
jump via |unite-kind-jump_list|. Valid range is 0 to 100,
where 0 is the top of the window and 100 is the bottom of
the window.
value meaning equivalent command
--------------------------------------
0 Window top normal! |z<CR>|
50 Window centre normal! |z.|
100 Window bottom normal! |z-|
The default value is 25.
*g:unite_kind_file_preview_max_filesize*
g:unite_kind_file_preview_max_filesize
It is max file size of preview action in file kind.
The default value is 1000000.
*g:unite_kind_openable_persist_open_blink_time*
g:unite_kind_openable_persist_open_blink_time
The amount of blink time after "persist_open" action from
|unite-kind-openable|.
The default value is "250m"
*g:unite_kind_cdable_cd_command*
g:unite_kind_cdable_cd_command
*g:unite_kind_openable_cd_command*
g:unite_kind_openable_cd_command
Specify the Vim command for cd action.
The default value is "cd".
*g:unite_kind_cdable_lcd_command*
g:unite_kind_cdable_lcd_command
*g:unite_kind_openable_lcd_command*
g:unite_kind_openable_lcd_command
Specify the Vim command for lcd action.
The default value is "lcd".
FILTER VARIABLES *unite-filter-variables*
*g:unite_converter_file_directory_width*
g:unite_converter_file_directory_width
Specify the filename width.
The default value is "45".
*g:unite_matcher_fuzzy_max_input_length*
g:unite_matcher_fuzzy_max_input_length
Specify the maximum input pattern length for
|unite-filter-matcher_fuzzy|, beyond which the matcher
falls back to |unite-filter-matcher_glob|.
The default value is 20.
DEPRECATED VARIABLES *unite-deprecated-variables*
g:unite_update_time *g:unite_update_time*
The time interval for updating the candidate list as the
filter text it typed in Msec.
If it is 0, this feature is disabled.
Note: This variable is deprecated. Please use
|unite#custom#profile()| and |unite-options-update-time|
instead.
g:unite_enable_start_insert *g:unite_enable_start_insert*
If this variable is 1, unite buffer will be in Insert Mode
immediately.
Note: This variable is deprecated. Please use
|unite#custom#profile()| and |unite-options-start-insert|
instead.
g:unite_split_rule *g:unite_split_rule*
Defines split position rule.
Note: This variable is deprecated. Please use
|unite#custom#profile()| and |unite-options-direction|
instead.
*g:unite_enable_split_vertically*
g:unite_enable_split_vertically
If this variable is 1, unite window is split vertically.
Note: This variable is deprecated. Please use
|unite#custom#profile()| and |unite-options-vertical| instead.
g:unite_winheight *g:unite_winheight*
The height of unite window when split horizontally. Ignored
when splitting vertically.
Note: This variable is deprecated. Please use
|unite#custom#profile()| and |unite-options-winheight|
instead.
g:unite_winwidth *g:unite_winwidth*
The width of unite window when split vertically. Ignored
when splitting horizontally.
Note: This variable is deprecated. Please use
|unite#custom#profile()| and |unite-options-winwidth| instead.
*g:unite_enable_short_source_names*
g:unite_enable_short_source_names
If this variable is 1, unite buffer will show short source
names when multiple sources.
Note: This variable is deprecated. Please use
|unite#custom#profile()| and
|unite-options-short-source-names| instead.
g:unite_abbr_highlight *g:unite_abbr_highlight*
Specify abbreviated candidates highlight.
Note: This variable is deprecated. Please use
|unite#custom#profile()| and |unite-options-abbr-highlight|
instead.
g:unite_cursor_line_time *g:unite_cursor_line_time*
Specify the cursor line highlight time.
If you scroll cursor quickly less than it, unite will skip
cursor line highlight.
If it is "0.0", this feature will be disabled.
Note: This variable is deprecated. Please use
|unite#custom#profile()| and |unite-options-cursor-line-time|
instead.
*g:unite_kind_file_vertical_preview*
g:unite_kind_file_vertical_preview
If this variable is 1, Unite will open the preview window
vertically rather than horizontally.
Note: This variable is deprecated. Please use
|unite#custom#profile()| and |unite-options-vertical-preview|
instead.
------------------------------------------------------------------------------
KEY MAPPINGS *unite-key-mappings*
Normal mode mappings.
<Plug>(unite_exit) *<Plug>(unite_exit)*
Exits unite. The previous unite buffer menu will be restored.
Note: You cannot close unite buffer using the |:close|,
|:bdelete| or |:quit| command. This mapping restores windows.
<Plug>(unite_all_exit) *<Plug>(unite_all_exit)*
Exits unite with previous unite buffer menu.
Note: You cannot close unite buffer using the |:close|,
|:bdelete| or |:quit| command. This mapping restores windows.
<Plug>(unite_restart) *<Plug>(unite_restart)*
Restarts unite.
<Plug>(unite_do_default_action) *<Plug>(unite_do_default_action)*
Runs the default action of the default candidates. The kinds
of each candidates have their own defined actions. See also
|unite-kinds| about kinds. Refer to |unite-default-action|
about default actions.
<Plug>(unite_choose_action) *<Plug>(unite_choose_action)*
Runs the default action of the selected candidates. The kinds
of each candidates have their own defined actions. Refer
to |unite-kinds| about kinds.
<Plug>(unite_insert_enter) *<Plug>(unite_insert_enter)*
Starts inputting narrowing text from the cursor position. In
the case when the cursor is not on the prompt line, this moves
the cursor into the prompt line automatically.
<Plug>(unite_insert_head) *<Plug>(unite_insert_head)*
Starts inputting narrowing text from the head of the line. In
the case when the cursor is not on the prompt line, this moves
the cursor into the prompt line automatically.
<Plug>(unite_append_enter) *<Plug>(unite_append_enter)*
Starts inputting narrowing text from the right side of the
cursor position. In the case when the cursor is not on the
prompt line, this moves the cursor into the prompt line
automatically.
<Plug>(unite_append_end) *<Plug>(unite_append_end)*
Starts inputting narrowing text from the end of the line. In
the case when the cursor is not on the prompt line, this moves
the cursor into the prompt line automatically.
<Plug>(unite_toggle_mark_current_candidate)
*<Plug>(unite_toggle_mark_current_candidate)*
Toggles the mark of the candidates in the current line. You
may run an action on multiple candidates at the same time by
marking multiple candidates.
<Plug>(unite_toggle_mark_current_candidate_up)
*<Plug>(unite_toggle_mark_current_candidate_up)*
Toggles the mark of the candidates in the current line and
moves the cursor up.
<Plug>(unite_toggle_mark_all_candidates)
*<Plug>(unite_toggle_mark_all_candidates)*
Toggles the mark of the candidates in the all lines.
<Plug>(unite_redraw) *<Plug>(unite_redraw)*
Without waiting for the update time defined in
|g:unite_update_time|, Unite updates its view immediately.
This is also used internally for updating the cache.
<Plug>(unite_rotate_next_source) *<Plug>(unite_rotate_next_source)*
Changes the order of source in normal order.
<Plug>(unite_rotate_previous_source) *<Plug>(unite_rotate_previous_source)*
Changes the order of source in reverse order.
<Plug>(unite_print_candidate) *<Plug>(unite_print_candidate)*
Shows the target of the action of the selected candidate.
<Plug>(unite_print_message_log) *<Plug>(unite_print_message_log)*
Shows the message log in current unite buffer.
<Plug>(unite_cursor_top) *<Plug>(unite_cursor_top)*
Moves the cursor to the top of the Unite buffer.
<Plug>(unite_cursor_bottom) *<Plug>(unite_cursor_bottom)*
Moves the cursor to the bottom of the Unite buffer.
Note: This mapping redraws all candidates.
<Plug>(unite_loop_cursor_down) *<Plug>(unite_loop_cursor_down)*
Goes to the next line. Goes up to the top when you are on the
bottom.
<Plug>(unite_loop_cursor_up) *<Plug>(unite_loop_cursor_up)*
Goes to the previous line. Goes down to the bottom when you
are on the top.
<Plug>(unite_skip_cursor_down) *<Plug>(unite_skip_cursor_down)*
Goes to the next line, but skips unmatched candidates.
Goes up to top when you are on the bottom.
<Plug>(unite_skip_cursor_up) *<Plug>(unite_skip_cursor_up)*
Goes to the previous line, but skips unmatched candidates.
Goes down to the bottom when you are on the top.
*<Plug>(unite_quick_match_default_action)*
<Plug>(unite_quick_match_default_action)
Runs the default action of the selected candidate with using
quick match. This doesn't work when there are marked
candidates.
*<Plug>(unite_quick_match_jump)*
<Plug>(unite_quick_match_jump)
Jump to the selected candidate with using quick
match.
<Plug>(unite_input_directory) *<Plug>(unite_input_directory)*
Narrows with inputting directory name.
<Plug>(unite_delete_backward_path) *<Plug>(unite_delete_backward_path)*
Deletes a narrowing text or a path upward. Refer to
|i_<Plug>(unite_delete_backward_path)|.
*<Plug>(unite_toggle_transpose_window)*
<Plug>(unite_toggle_transpose_window)
Change the unite buffer's split direction.
*<Plug>(unite_narrowing_input_history)*
<Plug>(unite_narrowing_input_history)
Narrowing candidates by input history.
*<Plug>(unite_narrowing_dot)*
<Plug>(unite_narrowing_dot)
Narrowing candidates by dot character.
<Plug>(unite_toggle_auto_preview) *<Plug>(unite_toggle_auto_preview)*
Toggles the unite buffer's auto preview mode.
<Plug>(unite_disable_max_candidates) *<Plug>(unite_disable_max_candidates)*
Disable the unite buffer's max_candidates.
<Plug>(unite_quick_help) *<Plug>(unite_quick_help)*
Views the mappings of the unite buffer.
<Plug>(unite_new_candidate) *<Plug>(unite_new_candidate)*
Add new candidate in cursor source.
<Plug>(unite_smart_preview) *<Plug>(unite_smart_preview)*
When you selected a candidate, runs preview action.
But if preview window is already visible, will close it.
Insert mode mappings.
<Plug>(unite_exit) *i_<Plug>(unite_exit)*
Exits Unite.
<Plug>(unite_insert_leave) *i_<Plug>(unite_insert_leave)*
Changes the mode into Normal mode and moves the cursor to the
first candidate line.
<Plug>(unite_delete_backward_char) *i_<Plug>(unite_delete_backward_char)*
Deletes a char just before the cursor, or quits the unite
buffer.
<Plug>(unite_delete_backward_line) *i_<Plug>(unite_delete_backward_line)*
Deletes all chars after the cursor until the end of the line.
<Plug>(unite_delete_backward_word) *i_<Plug>(unite_delete_backward_word)*
Deletes a word just before the cursor.
<Plug>(unite_delete_backward_path) *i_<Plug>(unite_delete_backward_path)*
Deletes a path upward.
For example doing <Plug>(unite_delete_backward_path) on >
/Users/ujihisa/Desktop
< or >
/Users/ujihisa/Desktop/
< this changes into >
/Users/ujihisa
< This is handy for changing file paths.
<Plug>(unite_select_next_line) *i_<Plug>(unite_select_next_line)*
Goes to the next candidate, or goes to the top from the
bottom.
<Plug>(unite_select_previous_line) *i_<Plug>(unite_select_previous_line)*
Goes to the previous candidate, or goes to the bottom from the
top.
<Plug>(unite_skip_next_line) *i_<Plug>(unite_skip_next_line)*
Goes to the next candidate but skips unmatched candidates.
Or, goes to the top from the bottom.
<Plug>(unite_skip_previous_line) *i_<Plug>(unite_skip_previous_line)*
Goes to the previous candidate but skips unmatched candidates.
Or, goes to the bottom from the top.
<Plug>(unite_select_next_page) *i_<Plug>(unite_select_next_page)*
Shows the next candidate page.
<Plug>(unite_select_previous_page) *i_<Plug>(unite_select_previous_page)*
Shows the previous candidate page.
<Plug>(unite_do_default_action) *i_<Plug>(unite_do_default_action)*
The same as |<Plug>(unite_do_default_action)|.
*i_<Plug>(unite_toggle_mark_current_candidate)*
<Plug>(unite_toggle_mark_current_candidate)
The same as |<Plug>(unite_toggle_mark_current_candidate)|.
*i_<Plug>(unite_toggle_mark_current_candidate_up)*
<Plug>(unite_toggle_mark_current_candidate_up)
The same as |<Plug>(unite_toggle_mark_current_candidate_up)|.
<Plug>(unite_choose_action) *i_<Plug>(unite_choose_action)*
The same as |<Plug>(unite_choose_action)|.
<Plug>(unite_move_head) *i_<Plug>(unite_move_head)*
Goes to the top of the line.
<Plug>(unite_move_left) *i_<Plug>(unite_move_left)*
Goes to the left of the line.
<Plug>(unite_move_right) *i_<Plug>(unite_move_right)*
Goes to the right of the line.
*i_<Plug>(unite_quick_match_default_action)*
<Plug>(unite_quick_match_default_action)
The same as |<Plug>(unite_quick_match_default_action)|.
*i_<Plug>(unite_quick_match_jump)*
<Plug>(unite_quick_match_jump)
The same as |<Plug>(unite_quick_match_jump)|.
<Plug>(unite_input_directory) *i_<Plug>(unite_input_directory)*
The same as |<Plug>(unite_input_directory)|.
*i_<Plug>(unite_toggle_transpose_window)*
<Plug>(unite_toggle_selected_candidates)
The same as |<Plug>(unite_toggle_transpose_window)|.
*i_<Plug>(unite_narrowing_input_history)*
<Plug>(unite_narrowing_input_history)
The same as |<Plug>(unite_narrowing_input_history)|.
<Plug>(unite_toggle_auto_preview) *i_<Plug>(unite_toggle_auto_preview)*
The same as |<Plug>(unite_toggle_auto_preview)|.
*i_<Plug>(unite_disable_max_candidates)*
<Plug>(unite_disable_max_candidates)
The same as |<Plug>(unite_disable_max_candidates)|.
<Plug>(unite_redraw) *i_<Plug>(unite_redraw)*
The same as |<Plug>(unite_redraw)|.
<Plug>(unite_print_candidate) *i_<Plug>(unite_print_candidate)*
The same as |<Plug>(unite_print_candidate)|.
<Plug>(unite_print_message_log) *i_<Plug>(unite_print_message_log)*
The same as |<Plug>(unite_print_message_log)|.
<Plug>(unite_new_candidate) *i_<Plug>(unite_new_candidate)*
The same as |<Plug>(unite_new_candidate)|.
<Plug>(unite_complete) *i_<Plug>(unite_complete)*
Complete narrowing text by candidate words.
Visual mode mappings.
*v_<Plug>(unite_toggle_selected_candidates)*
<Plug>(unite_toggle_mark_selected_candidates)
Toggle marks in visual selected candidates.
*unite_default_key_mappings*
Following keymappings are the default keymappings.
Normal mode mappings.
{lhs} {rhs}
-------- -----------------------------
i |<Plug>(unite_insert_enter)|
I |<Plug>(unite_insert_head)|
a In case when you selected a candidate,
|<Plug>(unite_choose_action)|
else |<Plug>(unite_append_enter)|
A |<Plug>(unite_append_end)|
q |<Plug>(unite_exit)|
<C-g> |<Plug>(unite_exit)|
Q |<Plug>(unite_all_exit)|
g<C-g> |<Plug>(unite_all_exit)|
<C-r> |<Plug>(unite_restart)|
<Space> |<Plug>(unite_toggle_mark_current_candidate)|
<S-Space> |<Plug>(unite_toggle_mark_current_candidate_up)|
* |<Plug>(unite_toggle_mark_all_candidates)|
M |<Plug>(unite_disable_max_candidates)|
<Tab> |<Plug>(unite_choose_action)|
<C-n> |<Plug>(unite_rotate_next_source)|
<C-p> |<Plug>(unite_rotate_previous_source)|
<C-a> |<Plug>(unite_print_message_log)|
<C-k> |<Plug>(unite_print_candidate)|
<C-l> |<Plug>(unite_redraw)|
<C-h> |<Plug>(unite_delete_backward_path)|
gg |<Plug>(unite_cursor_top)|
<C-Home> |<Plug>(unite_cursor_top)|
G |<Plug>(unite_cursor_bottom)|
<C-End> |<Plug>(unite_cursor_bottom)|$
j |<Plug>(unite_loop_cursor_down)|
<Down> |<Plug>(unite_loop_cursor_down)|
k |<Plug>(unite_loop_cursor_up)|
<Up> |<Plug>(unite_loop_cursor_up)|
J |<Plug>(unite_skip_cursor_down)|
K |<Plug>(unite_skip_cursor_up)|
g? |<Plug>(unite_quick_help)|
N |<Plug>(unite_new_candidate)|
. |<Plug>(unite_narrowing_dot)|
<2-LeftMouse> |<Plug>(unite_do_default_action)|
<RightMouse> |<Plug>(unite_exit)|
p |<Plug>(unite_smart_preview)|
<CR> In case when you selected a candidate, runs default action
b In case when you selected a candidate, runs bookmark action
d In case when you selected a candidate, runs delete action
e In case when you selected a candidate, runs narrow action
t In case when you selected a candidate, runs tabopen action
yy In case when you selected a candidate, runs yank action
o In case when you selected a candidate, runs open action
x In case when you selected a candidate, runs
|<Plug>(unite_quick_match_default_action)|
Insert mode mappings.
{lhs} {rhs}
-------- -----------------------------
<ESC> |i_<Plug>(unite_insert_leave)|
<Tab> |i_<Plug>(unite_choose_action)|
<C-n> |i_<Plug>(unite_select_next_line)|
<Down> |i_<Plug>(unite_select_next_line)|
<C-p> |i_<Plug>(unite_select_previous_line)|
<Up> |i_<Plug>(unite_select_previous_line)|
<C-f> |i_<Plug>(unite_select_next_page)|
<C-b> |i_<Plug>(unite_select_previous_page)|
<CR> |i_<Plug>(unite_do_default_action)|
<C-h> |i_<Plug>(unite_delete_backward_char)|
<BS> |i_<Plug>(unite_delete_backward_char)|
<C-u> |i_<Plug>(unite_delete_backward_line)|
<C-w> |i_<Plug>(unite_delete_backward_word)|
<C-a> |i_<Plug>(unite_move_head)|
<Home> |i_<Plug>(unite_move_head)|
<Left> |i_<Plug>(unite_move_left)|
<Right> |i_<Plug>(unite_move_right)|
<C-l> |i_<Plug>(unite_redraw)|
<C-g> |i_<Plug>(unite_exit)|
<Space> In case when you selected a candidate,
|i_<Plug>(unite_toggle_mark_current_candidate)|
<S-Space> In case when you selected a candidate,
|i_<Plug>(unite_toggle_mark_current_candidate_up)|
<2-LeftMouse> |i_<Plug>(unite_do_default_action)|
<RightMouse> |i_<Plug>(unite_exit)|
<C-d> runs delete action
<C-e> runs edit action
<C-t> runs tabopen action
<C-y> runs yank action
<C-o> runs open action
Visual mode mappings.
{lhs} {rhs}
-------- -----------------------------
<Space> |v_<Plug>(unite_toggle_selected_candidates)|
------------------------------------------------------------------------------
FUNCTIONS *unite-functions*
CORE *unite-functions-core*
unite#get_kinds([{kind-name}]) *unite#get_kinds()*
Gets the kinds of {kind-name}. Unless they exist, this
returns an empty dictionary. This returns a dictionary of
keys that are kind names and the values are the kinds when you
skip giving {kind-name}.
Note: Changing the return value is not allowed.
unite#get_sources([{source-name}]) *unite#get_sources()*
Gets the loaded source of {source-name}. Unless they exist,
this returns an empty dictionary. This returns a dictionary
of keys that are source names and the values are the sources
when you skip giving {source-name}. If you give {source-name}
as a dictionary, unite.vim use this source temporary.
Note: Changing the return value is not allowed.
unite#get_unite_winnr({buffer-name}) *unite#get_unite_winnr()*
Returns the unite window number which has {buffer-name}. If
the window is not found, it will return -1.
unite#redraw([{winnr}]) *unite#redraw()*
Redraw {winnr} unite window. If you omit {winnr}, current
window number will be used.
unite#force_redraw([{winnr}]) *unite#force_redraw()*
Force redraw {winnr} unite window. If you omit {winnr},
current window number will be used.
CUSTOMS *unite-functions-customs*
unite#start({sources}, [, {context}]) *unite#start()*
Creates a new Unite buffer. In the case when you are already
on a Unite buffer, the narrowing text is preserved.
{sources} is a list of elements which are formatted as
{source-name} or [{source-name}, {args}, ...]. You may
specify multiple string arguments for {args} of {source-name}.
Refer to |unite-notation-{context}| about {context}. If you
skip a value, it uses the default value.
unite#start_complete({sources}, [{context}]) *unite#start_complete()*
Returns the key sequence that opens unite buffer for
completion. This will be used with inoremap <buffer><expr>
usually.
Example:
>
inoremap <buffer><expr> <C-l> unite#start_complete(
\ ['vimshell/history'], {
\ 'start_insert' : 0,
\ 'input' : vimshell#get_cur_text()})
<
unite#get_candidates({sources}, [, {context}]) *unite#get_candidates()*
Get a list of all source candidates. A unite buffer is not
created. This function may not work with some sources.
The arguments are the same as with |unite#start()|.
Note: the max_candidates source option is ignored.
*unite#action#do_candidates()*
unite#action#do_candidates({action-name}, {candidates}, [, {context}])
Does {action-name} with {candidates}. Unite buffer is not
created. This function may not work in some actions.
Note: To get candidates, use |unite#get_candidates()|.
unite#get_context() *unite#get_context()*
Gets the context information of the current Unite buffer.
This is used by functions like |unite#custom#action()| to call
|unite#start()| internally.
unite#do_action({action-name}) *unite#do_action()*
Returns the key sequence for running {action-name} action on
the marked candidates. This function works only when Unite
has been already activated. This causes a runtime error if
{action-name} doesn't exist or the action is invalid.
Note: This action will return Vim to Normal mode.
This is handy for defining a key mapping to run an action.
This runs the default action when you specify "default" for
{action-name}.
This runs an action on the candidates of the current line or
the top of the candidates when none of the candidates are
marked.
This is usually used as inoremap <buffer><expr> or
nnoremap <buffer><expr>. For example,
>
nnoremap <silent><buffer><expr> <C-k>
\ unite#do_action('preview')
>
unite#smart_map({narrow-map}, {select-map}) *unite#smart_map()*
Returns the key sequence which works with both modes of
narrowing and selecting with respect to the given narrow-map
and select-map. Use this with |unite#do_action()|. This will
be used with inoremap <buffer><expr> or nnoremap
<buffer><expr> usually.
Example:
>
inoremap <buffer><expr> '
\ unite#smart_map("'", unite#do_action('preview'))
<
unite#get_status_string() *unite#get_status_string()*
Returns unite status string. It is useful to customize the
statusline.
*unite#mappings#set_current_matchers()*
unite#mappings#set_current_matchers({matchers})
Changes current unite buffer matchers.
Example:
>
nnoremap <buffer><expr> M unite#mappings#set_current_matchers(
\ empty(unite#mappings#get_current_matchers()) ?
\ ['matcher_migemo'] : [])
<
*unite#mappings#set_current_sorters()*
unite#mappings#set_current_sorters({sorters})
Changes current unite buffer sorters.
Example:
>
nnoremap <buffer><expr> S unite#mappings#set_current_sorters(
\ empty(unite#mappings#get_current_sorters()) ?
\ ['sorter_reverse'] : [])
<
*unite#mappings#set_current_converters()*
unite#mappings#set_current_converters({matchers})
Changes current unite buffer matchers.
*unite#mappings#get_current_matchers()*
unite#mappings#get_current_matchers()
Gets current unite buffer matchers.
*unite#mappings#get_current_sorters()*
unite#mappings#get_current_sorters()
Gets current unite buffer sorters.
*unite#mappings#get_current_converters()*
unite#mappings#get_current_converters()
Gets current unite buffer converters.
*unite#custom#profile()*
*unite#set_profile()*
unite#custom#profile({profile-name}, {option-name}, {value})
Set {profile-name} specialized {option-name} to {value}.
The options below are available:
substitute_patterns (Dictionary)
Specify substitute patterns. The keys are "pattern",
"subst" and "priority".
"pattern" is the replace target regexp and "subst" is the
substitute string. If you specify the same "pattern" again,
then the setting is just updated. You may remove "pattern" by
giving "" to "subst". "priority" prioritizes how this
replaces. If you skipped giving "priority" it is 0. Give a
bigger number for a "pattern" which must be done earlier.
Note: The initial text of Unite buffers is not replaced with
these values.
You may mimic ambiguous matching with using this function.
>
call unite#custom#profile('files', 'substitute_patterns', {
\ 'pattern' : '[^*]\ze[[:alnum:]]',
\ 'subst' : '\0*',
\ 'priority' : 100,
\ })
call unite#custom#profile('files', 'substitute_patterns', {
\ 'pattern' : '[[:alnum:]]',
\ 'subst' : '\0',
\ 'priority' : 100,
\ })
<
The former does ambiguous search within "/" while the latter
does over it.
The initial value is defined as the following; on a buffer of
which profile_name is files, it adds a wildcard in order to
match ~ as $HOME and to match "/" partially.
>
call unite#custom#profile('files', 'substitute_patterns', {
\ 'pattern' : '^\~',
\ 'subst' : substitute(
\ unite#util#substitute_path_separator($HOME),
\ ' ', '\\\\ ', 'g'),
\ 'priority' : -100,
\ })
call unite#custom#profile('files', 'substitute_patterns', {
\ 'pattern' : '\.\{2,}\ze[^/]',
\ 'subst' : "\\=repeat('../', len(submatch(0))-1)",
\ 'priority' : 10000,
\ })
<
If {subst} is a list, Unite searches by some narrowing texts.
Note: It is only once to be replaced with a list.
>
call unite#custom#profile('files', 'substitute_patterns', {
\ 'pattern' : '^\.v/',
\ 'subst' : [expand('~/.vim/'),
\ unite#util#substitute_path_separator($HOME)
\ . '/.bundle/*/'],
\ 'priority' : 1000,
\ })
<
matchers (List)
Specify a list of matcher names. The filters are called
instead of the source filters. If you change filters
dynamically,
use |unite#mappings#set_current_matchers()| instead.
sorters (List)
Specify a list of sorter names. The filters are called
instead of the source sorters. If you change filters
dynamically,
use |unite#mappings#set_current_sorters()| instead.
converters (List)
Specify a list of converter names. The filters are called
instead of the source converters. If you change filters
dynamically,
use |unite#mappings#set_current_converters()| instead.
context (Dictionary)
Specify default {context} value in unite buffer.
You can customize the context in the unite buffer.
Valid key context is in |unite-options|. However, "-" is
substituted to "_", and "-" prefix is removed.
Note: In temporary unite buffers and script created unite
buffers, the context overwrites current context instead of
default context.
Note: If you want to change default context, you should use
"default" profile name.
Note: If you use single source in unite.vim commands with
omitting profile name and buffer name, "source/{source-name}"
is used. Thus, you can define a source-specific profile.
Example:
>
" Start insert mode in unite-action buffer.
call unite#custom#profile('action', 'context', {
\ 'start_insert' : 1
\ })
" Set "-no-quit" automatically in grep unite source.
call unite#custom#profile('source/grep', 'context', {
\ 'no_quit' : 1
\ })
" Use start insert by default.
call unite#custom#profile('default', 'context', {
\ 'start_insert' : 1
\ })
<
Note: In action(script) executed source,
"script/{source-name1}[:{{source-name2}:...}]" is used. Thus,
you can define a source-specific profile.
>
" Do not use log.
call unite#custom#profile('script/neobundle/update',
\ 'context', {
\ 'log' : 0
\ })
<
*unite#custom#substitute()*
unite#custom#substitute({profile-name}, {pattern}, {subst} [, {priority}])
Specify a replace pattern of narrowing text for a Unite buffer
with the name of {profile-name}.
Note: This is a wrapper function for backward compatibility.
*unite#custom_default_action()*
*unite#custom#default_action()*
unite#custom#default_action({kind}, {default-action})
Changes the default action of {kind} into {default-action}.
You may specify multiple {kind} with the separator ",". For
Example:
>
call unite#custom#default_action('file', 'tabopen')
<
*unite#custom#action()*
*unite#custom_action()*
unite#custom#action({kind}, {name}, {action})
Adds an {action} of which name is {name} for {kind}.
You may specify multiple {kind} with the separator ",".
For example:
>
let my_tabopen = {
\ 'is_selectable' : 1,
\ }
function! my_tabopen.func(candidates)
call unite#take_action('tabopen', a:candidates)
let dir = isdirectory(a:candidate.word) ?
\ a:candidate.word : fnamemodify(a:candidate.word, ':p:h')
execute g:unite_kind_openable_lcd_command fnameescape(dir)
endfunction
call unite#custom#action('file,buffer', 'tabopen', my_tabopen)
unlet my_tabopen
<
*unite#custom#alias()*
*unite#custom_alias()*
unite#custom#alias({kind}, {name}, {action})
Defines an action of {name} which is another name of {action}
in {kind}. You may specify multiple {kind} with the
separator ",". If {action} is "nop", the action is disabled.
example:
>
call unite#custom#alias('file', 'h', 'left')
<
*unite#custom_filters()*
unite#custom_filters({source-name}, {filters})
Note: This function is deprecated. Please use
|unite#custom#source()| instead.
*unite#custom_max_candidates()*
unite#custom_max_candidates({source-name}, {max})
Note: This function is deprecated. Please use
|unite#custom#source()| instead.
*unite#custom#source()*
*unite#custom_source()*
unite#custom#source({source-name}, {option-name}, {value})
Set {source-name} source specialized {option-name} to {value}.
You may specify multiple sources with the separator "," in
{source-name}.
The options below are available:
filters (List)
Specify a list of filter names. The filters overwrite source
default filters.
matchers (List) or (String)
Specify a list of matcher names. The filters overwrite source
default matchers.
sorters (List) or (String)
Specify a list of sorter names. The filters overwrite source
default sorters.
converters (List) or (String)
Specify a list of converter names. The filters overwrite
source default converters.
max_candidates (Number)
Changes the max candidates into {value}. If {value} is 0, all
candidates are displayed.
ignore_pattern (String)
Specify the regexp pattern to ignore candidates of the source.
This applies on the path or word attribute of candidates.
Note: It is not case sensitive.
ignore_globs (List) or (String)
Specify the glob pattern list to ignore candidates of the
source.
You can use 'wildignore' globs easily. But you must split it
by ",".
If it starts with "./", it is current directory pattern.
This applies on the path or word attribute of candidates.
Note: It is not case sensitive.
Example: >
call unite#custom#source('file_rec', 'ignore_globs',
\ split(&wildignore, ','))
<
white_globs (List) or (String)
Specify the whitelist glob pattern list not to ignore
candidates of the source.
syntax (String)
You can change source syntax name.
If it is empty string, the source syntax feature is disabled.
Example: >
call unite#custom#source('output', 'syntax', '')
<
*unite#take_action()*
unite#take_action({action-name}, {candidate})
Runs an action {action-name} against {candidate}. This will
mainly be used in |unite#custom#action()|. When the action is
is_selectable, the {candidate} will be automatically converted
into a list.
*unite#take_parents_action()*
unite#take_parents_action({action-name}, {candidate}, {extend-candidate})
Similar to |unite#take_action()|, but searches the parents'
action table by combining {extend-candidate} with {candidate}.
This is handy for reusing parents' actions.
unite#define_source({source}) *unite#define_source()*
Adds {source} dynamically. See also |unite-create-source|
about the detail of source. If a source with the same name
exists, it is overwritten.
unite#define_kind({kind}) *unite#define_kind()*
Adds {kind} dynamically. See also |unite-create-kind| about
the detail of kind. If a kind with the same name exists, it
is overwritten.
unite#define_filter({filter}) *unite#define_filter()*
Adds {filter} dynamically. See also |unite-create-filter|
about the detail of filter. If a filter with the same name
exists, it is overwritten.
unite#undef_source({name}) *unite#undef_source()*
Removes the source with a name of {name} that was added by
|unite#define_source()|. If such a source doesn't exist, this
function does nothing.
unite#undef_kind({name}) *unite#undef_kind()*
Removes the kind with a name of {name} that was added by
|unite#define_kind()|. If such a kind doesn't exist, this
function does nothing.
unite#undef_filter({name}) *unite#undef_filter()*
Removes the filter with a name of {name} that was added by
|unite#define_filter()|. If such a filter doesn't exist,
this function does nothing.
*unite#filters#matcher_default#use()*
unite#filters#matcher_default#use({matchers})
Changes the default match used by
|unite-filter-matcher_default| into {matchers}.
{matchers} must be specified with a list of matcher names.
*unite#filters#sorter_default#use()*
unite#filters#sorter_default#use({sorters})
Changes the default sorter used by
|unite-filter-sorter_default| into {sorters}.
{sorters} must be specified with a list of sorter names.
*unite#filters#converter_default#use()*
unite#filters#converter_default#use({converters})
Changes the default converter used by
|unite-filter-converter_default| into {converters}.
{converters} must be specified with a list of converter names.
------------------------------------------------------------------------------
OPTIONS *unite-options*
{options} are options for a unite buffer. You may give the following
parameters for an option. You need to escape spaces with "\".
Note: In unite.vim options are converted to a context dictionary.
The "-buffer-name" option is the same as the "buffer_name" key in
the context dictionary.
*unite-options-no-*
-no-{option-name}
Disable {option-name} flag.
Note: If you use both {option-name} and -no-{option-name} in
same unite buffer, it is undefined.
*unite-source-custom-options*
-custom-{option-name}={value}
Source custom options.
For example: "-custom-grep-search-word-highlight=Error"
*unite-options-no-quit*
-no-quit
Doesn't close unite buffer after firing an action. Unless you
specify it, a unite buffer gets closed when you selected an
action which is "is_quit".
Default: quit
*unite-options-no-empty*
-no-empty
If candidate is empty, it doesn't open any unite buffer.
Default: empty
*unite-options-no-split*
-no-split
Open the unite buffer in the current window instead of a new
window. This is ignored if the current buffer has set
'bufhidden' to unload/delete/wipe.
Default: split
*unite-options-no-cursor-line*
-no-cursor-line
Disable cursor line highlight. This option is useful for
animation source.
Default: cursor-line
*unite-options-no-focus*
-no-focus
Do not focus the unite buffer after opening it.
Default: focus
*unite-options-buffer-name*
-buffer-name={buffer-name}
Specify a buffer name.
Note: Buffer name must not contain any spaces.
Default: "default"
*unite-options-profile-name*
-profile-name={profile-name} (String)
Specify a profile name.
Default: the same as the buffer name
*unite-options-input*
-input={input-text}
Specify an initial narrowing text.
Default: ""
*unite-options-path*
-path={input-text}
Specify an initial narrowing path.
Default: ""
*unite-options-prompt*
-prompt={prompt-text}
Specify the prompt.
Note: "uniteInputPrompt" highlight is used.
Default: ""
*unite-options-prompt-visible*
-prompt-visible
Visible prompt if narrowing text is empty.
Note: It is old prompt behavior.
Default: no-prompt-visible
*unite-options-prompt-focus*
-prompt-focus
Move to prompt if unite enters insert mode.
Note: It is old prompt behavior.
Default: no-prompt-focus
*unite-options-prompt-direction*
-prompt-direction="top" or "below"
Specify the prompt direction.
Note: If it is "below", |unite-options-auto-resize| is used
automatically. To disable it, you must set "-no-auto-resize"
option.
Default: "below" (if |unite-options-direction| contains
"below")
*unite-options-candidate-icon*
-candidate-icon={icon-text}
Specify the candidate icon text.
Default: " "
*unite-options-marked-icon*
-marked-icon={icon-text}
Specify the marked icon text.
Default: " "
*unite-options-no-hide-icon*
-no-hide-icon
Don't hide candidates icons.
Default: hide-icon (hide candidates icons)
*unite-options-default-action*
-default-action={default-action}
Specify a default action.
Default: "default"
*unite-options-start-insert*
-start-insert
Opens a unite buffer in the narrowing mode.
Default: no-start-insert
When both options are undefined, it depends on
|g:unite_enable_start_insert| option.
The behavior is undefined when both options are defined.
*unite-options-keep-focus*
-keep-focus
Keep the focus on a unite buffer after firing an action.
Note: This option is used with "-no-quit" option.
Default: no-keep-focus
*unite-options-winwidth*
-winwidth={window-width}
Specify the width of a unite buffer.
Default: "90"
*unite-options-winheight*
-winheight={window-height}
Specify the height of a unite buffer.
Default: "20"
*unite-options-immediately*
-immediately
If the number of candidates is exactly one, it runs the
default action immediately. If the candidate list is
empty, it does not open any unite buffer.
Default: no-immediately
*unite-options-force-immediately*
-force-immediately
If candidates are exists, it runs the default action
immediately. If the candidate list is empty, it does not open
any unite buffer.
Default: no-force-immediately
*unite-options-auto-preview*
-auto-preview
When you select a candidate, it runs the "preview" action
automatically.
Default: no-auto-preview
*unite-options-auto-highlight*
-auto-highlight
When you select a candidate, it runs the "highlight" action
automatically.
Default: no-auto-highlight
*unite-options-complete*
-complete
Uses unite completion interface. |unite-options-col| is also
required.
Default: no-complete
*unite-options-col*
-col={column-number}
Specify the called unite buffer position.
Default: "-1"
*unite-options-vertical*
-vertical
Splits unite window vertically. |unite-options-winwidth| is
used.
Default: no-vertical
*unite-options-horizontal*
-horizontal
Splits unite window horizontally.
Default: horizontal
When both options are undefined, "-horizontal" is used by
default.
The behavior is undefined when both options are defined.
*unite-options-direction*
-direction={direction}
Defines split position rule.
When it is "dynamictop", if each item's length is less than
the current window's width, the direction becomes "aboveleft",
otherwise - "topleft".
Similarly for "dynamicbottom", the direction becomes
"belowright" or "botright".
It is useful to always make best effort to show all items
without shortening.
Default: "topleft"
*unite-options-verbose*
-verbose
Print verbose warning messages.
Default: no-verbose
*unite-options-auto-resize*
-auto-resize
Auto resize unite buffer height by candidates number.
Default: no-auto-resize
*unite-options-no-resize*
-no-resize
Do not resize the unite buffer after opening it.
Default: resize
*unite-options-toggle*
-toggle
Close unite buffer window if one of the same buffer name
exists.
Default: no-toggle
*unite-options-quick-match*
-quick-match
Start in the quick match mode.
Default: no-quick-match
*unite-options-create*
-create
Create a new unite buffer.
Default: no-create (reuse same buffer named unite buffer)
*unite-options-update-time*
-update-time={new-update-time}
Change 'updatetime' option. This option is useful for
animation source.
Note: Must be smaller than 'updatetime'.
Default: "200"
*unite-options-abbr-highlight*
-abbr-highlight={highlight-name}
Specify abbreviated candidates highlight.
Default: "Normal"
*unite-options-hide-source-names*
-hide-source-names
Hides source names.
Note: Source highlight will be overwritten by other sources.
Default: no-hide-source-names (single source)
hide-source-names (multiple sources)
*unite-options-max-multi-lines*
-max-multi-lines={max-lines}
Specify the lines max in multiline candidates.
Default: "5"
*unite-options-here*
-here
Open unite buffer at the cursor position.
Note: This option is disabled if "-vertical" or "-no-split"
option is on.
Default: no-here
*unite-options-silent*
-silent
Shuts messages up in unite buffer.
Default: no-silent
*unite-options-auto-quit*
-auto-quit
Closes unite buffer automatically when all candidates are
shown.
Default: no-auto-quit
*unite-options-short-source-names*
-short-source-names
Use short source names if multiple sources.
Default: no-short-source-names
*unite-options-multi-line*
-multi-line
Force use multi line. If candidate abbr is too long,
unite.vim will fold automatically.
Default: no-multi-line
*unite-options-resume*
-resume
Reuse any previous buffer. If none exist, a new unite
buffer gets created. Cf: |:UniteResume|
Note: Uses |unite-options-buffer-name| to search for
previous buffers, which must be set.
Default: no-resume
*unite-options-wrap*
-wrap
If it is set, lines longer than the width of the window will
wrap and displaying continues on the next line.
Note: This option will set 'wrap' option and disable
|unite-options-multi-line| option.
Default: no-wrap
*unite-options-select*
-select={select-candidate-index}
If it is set, unite will select the specified candidate.
Note: The candidate index is 0-based.
Default: "-1"
*unite-options-log*
-log
Enable log mode. In log mode, the cursor is placed at the
bottom automatically.
Default: no-log
*unite-options-truncate*
-truncate
Truncate lines longer than the window's width.
Default: truncate
*unite-options-truncate-width*
-truncate-width
Truncate percentage of lines.
Default: 50(%)
*unite-options-tab*
-tab
Open a new unite buffer in a new tabpage.
Default: no-tab
*unite-options-sync*
-sync
Disable asynchronous mode like |ctrlp| plugin.
It is useful if you don't want to get input lag.
Default: no-sync
*unite-options-unique*
-unique
Unique candidates by word attribute.
Default: no-unique
*unite-options-cursor-line-time*
-cursor-line-time={icon-text}
Specify the cursor line highlight time.
If you scroll cursor quickly less than it, unite will skip
cursor line highlight.
If it is "0.0", this feature will be disabled.
Default: "0.10"
*unite-options-wipe*
-wipe
Wipeout unite buffer when quit.
It is useful for using jumplist.
Note: If it is used, you cannot use |:UniteResume| feature.
Default: no-wipe
*unite-options-ignorecase*
-ignorecase
Specify 'ignorecase' value in unite buffer.
Default: 'ignorecase' value
*unite-options-smartcase*
-smartcase
Specify 'smartcase' value in unite buffer.
Default: 'smartcase' value
*unite-options-no-restore*
-no-restore
Don't restore the cursor in unite buffer.
Default: restore
*unite-options-vertical-preview*
-vertical-preview
If it is on, Unite will open the preview window
(when executing the file preview action) vertically rather
than horizontally. It will take up half the width of the
current Unite buffer.
Default: no-vertical-preview
*unite-options-force-redraw*
-force-redraw
It it is on, Unite will redraw the candidates like
|<Plug>(unite_redraw)|.
Default: no-force-redraw
*unite-options-previewheight*
-previewheight={height}
Change preview window height in unite buffer.
Default: 'previewheight'
*unite-options-no-buffer*
-no-buffer
Don't create unite buffer.
Default: buffer
*unite-options-match-input*
-match-input
Enable input keyword match highlight.
Default: match-input
*unite-options-file-quit*
-file-quit
Jump to file buffer after firing an action.
Default: no-file-quit
==============================================================================
SOURCES *unite-sources*
*unite-source-file*
file Nominates an input file as a candidate.
Note: This source doesn't nominate files in the parent
directory (e.g. "../") or hidden files (e.g. ".gitignore").
If you want to open these files, please input ".".
Source arguments:
1. the file/directory path.
*unite-source-file/new*
file/new Nominates a new input file as a candidate.
Source arguments:
1. the file/directory path.
*unite-source-file/async*
file/async Similar to |unite-source-file|, but get files asynchronously.
*unite-source-file_rec*
file_rec, rec Gather files recursive and nominates all file names under the
search directory (argument 1) or the current directory (if
argument is omitted) as candidates. This may freeze Vim when
there are too many candidates. The candidates are cached by
file_rec source. To clear cache, use |<Plug>(unite_redraw)|
keymapping.
Note: If you edit file by Vim, file_rec source will update
cache file.
Note: If the candidates are over 1000, it will disable make
cache.
Note: If you input |<Plug>(unite_restart)|, you can change
search directory.
Source arguments:
1. the search directory.
Source custom options:
-custom-rec-ignore-directory-pattern: ignore directory pattern
-custom-grep-default_opts : default grep options
-custom-grep-recursive_opt : grep recursive options
-custom-grep-search-word-highlight : search word highlight
*unite-source-file_rec/async*
file_rec/async Similar to |unite-source-file_rec|, but get files
asynchronously with |g:unite_source_rec_async_command|.
Note: Requires |vimproc|.
Note: Requires the "ag" or "find" command.
Note: Windows "find" command is not supported.
Note: If you edit one of the files in Vim, the source will
update its cache.
Note: In windows environment, you must define
|g:unite_source_rec_async_command| variable.
Note: It is really slow in Windows.
"gtags/path" source is recommended.
https://github.com/hewes/unite-gtags
Source arguments:
1. the target directories splitted by newlines.
*unite-source-file_rec/neovim*
file_rec/neovim Similar to |unite-source-file_rec|, but get files
asynchronously by neovim job APIs with
|g:unite_source_rec_async_command|.
Note: Requires neovim and the "find" command.
Note: Windows "find" command is not supported.
Note: If you edit one of the files in Vim, the source will
update its cache.
Source arguments:
1. the target directories splitted by newlines.
*unite-source-file_rec/git*
file_rec/git Similar to |unite-source-file_rec|, but get files by "git
ls-files" command. It is faster than file_rec/async source.
Note: Requires vimproc.
Note: Requires git.
Note: Searches from current directory only.
Source arguments:
1. "git ls-files" arguments
Example: >
nnoremap <silent> ,ug :<C-u>Unite
\ file_rec/git:--cached:--others:--exclude-standard<CR>
*unite-source-directory*
directory Nominates an input directory as a candidate.
Note: This source doesn't nominate the parent
directory (Example: "../") or hidden directories (Example:
".git"). If you want to open these directories, please input
".".
Source arguments:
1. the file/directory path.
*unite-source-directory/new*
directory/new Nominates a new input directory as a candidate.
Source arguments:
1. the file/directory path.
*unite-source-buffer*
buffer Nominates opened buffers as candidates, ordering by time
series.
Output format : "<bufnr> <flags> <path> (<time>)"
If argument 1 is "!", both listed and non-listed buffer are
displayed.
If argument 1 is "?", non-listed buffers are displayed.
If argument 1 is "+", only modified buffers are displayed.
If argument 1 is "-", only file buffers are displayed.
If argument 1 is "t", only terminal buffers are displayed.
Source arguments:
1. "!", "?", "+", "-", or "t"
*unite-source-buffer_tab*
buffer_tab Nominates opened buffers only in the current tab as
candidates, ordering by time series.
Arguments are the same as for |unite-source-buffer|.
Note: This source requires |tabpagebuffer| or |ctrlspace|.
Please install:
http://github.com/Shougo/tabpagebuffer.vim
or
http://github.com/szw/vim-ctrlspace
Source arguments:
1. "!", "?", "+" or "-".
*unite-source-tab*
tab Nominates opened tabs as candidates, regarding t:cwd as the
current directory and t:title as the title of the tab. This
requires |gettabvar()|.
If t:title exists, this is used as "word" for narrowing.
Otherwise, the buffer name of the current tab is used.
Source arguments:
1. "no-current" removes current tab from candidates.
*unite-source-register*
register Nominates the strings stored in registers as candidates.
Source arguments:
1. register names
Example: >
nnoremap <silent> ,ur :<C-u>Unite
\ register:abcdef<CR>
<
*unite-source-bookmark*
bookmark Nominates files or directories you bookmarked as candidates.
If source arguments are omitted, "default" bookmark file name
is used.
Source arguments:
1. Bookmark file name.
use `_` to load from all bookmark files
use `*` to glob
*unite-source-source*
source Nominates Unite source names themselves as candidates.
If arguments are given, arguments source names are listed.
If no arguments are given, all source names are listed.
Source arguments:
1. source name 1
2. source name 2
...
n. source name n
Runs |unite#start()| with the selected source name, using the
current Unite buffer context.
*unite-source-window*
window Nominates opened windows as candidates, ordering by time
series.
Source arguments:
1. "no-current" removes current window from candidates.
2. "all" gathers all tab windows candidates.
*unite-source-window/gui*
window/gui Nominates opened GUI windows as candidates.
Note: "wmctrl" command is needed. For Linux only.
*unite-source-output*
output Nominates executed Vim command output as candidates.
Source arguments:
1. Vim command.
2. command args (but you cannot use "!" by itself)
If the last argument is "!", it prints by dummy candidates.
This behavior is useful for output message.
>
" It outputs "foo bar".
:Unite output:echo:"foo:bar"
:Unite output:echo\ "foo\ bar"
" It outputs "foo bar" by dummy.
:Unite output:echo:"foo:bar":!
<
*unite-source-output/shellcmd*
output/shellcmd
Nominates executed shell command output as candidates.
Source arguments:
1. Shell command.
2. command args (but you cannot use "!" by itself)
If the last argument is "!", it prints by dummy candidates.
This behavior is useful for output message.
>
" It outputs "ls" output.
:Unite -log -wrap output/shellcmd:ls
<
*unite-source-command*
command Nominates Vim Ex commands as candidates.
*unite-source-function*
function Nominates functions as candidates.
*unite-source-mapping*
mapping Nominates Vim mappings as candidates.
Source arguments:
1. Buffer number.
*unite-source-grep*
grep Nominates "grep" command output as candidates.
Note: This source is created by Sixeight.
Note: This source requires |vimproc|. Please install.
http://github.com/Shougo/vimproc
Source arguments:
1. the target directories splitted by newlines.
2. "grep" options.
3. the narrowing pattern (if you omit it,
|unite-options-input| or input prompt is used).
Max candidates: 100
Special Target:
% : Current buffer name
# : Alternate buffer name
$buffers : All buffer names
Source custom options:
-custom-grep-command : grep command name
-custom-grep-default_opts : default grep options
-custom-grep-recursive_opt : grep recursive options
-custom-grep-search-word-highlight : search word highlight
Example:
>
:Unite grep:~/.vim/autoload/unite/sources:-iR:file
<
Settings Example:
>
if executable('hw')
" Use hw (highway)
" https://github.com/tkengo/highway
let g:unite_source_grep_command = 'hw'
let g:unite_source_grep_default_opts = '--no-group --no-color'
let g:unite_source_grep_recursive_opt = ''
elseif executable('ag')
" Use ag (the silver searcher)
" https://github.com/ggreer/the_silver_searcher
let g:unite_source_grep_command = 'ag'
let g:unite_source_grep_default_opts =
\ '-i --vimgrep --hidden --ignore ' .
\ '''.hg'' --ignore ''.svn'' --ignore ''.git'' --ignore ''.bzr'''
let g:unite_source_grep_recursive_opt = ''
elseif executable('pt')
" Use pt (the platinum searcher)
" https://github.com/monochromegane/the_platinum_searcher
let g:unite_source_grep_command = 'pt'
let g:unite_source_grep_default_opts = '--nogroup --nocolor'
let g:unite_source_grep_recursive_opt = ''
elseif executable('ack-grep')
" Use ack
" http://beyondgrep.com/
let g:unite_source_grep_command = 'ack-grep'
let g:unite_source_grep_default_opts =
\ '-i --no-heading --no-color -k -H'
let g:unite_source_grep_recursive_opt = ''
elseif executable('jvgrep')
" Use jvgrep
" https://github.com/mattn/jvgrep
let g:unite_source_grep_command = 'jvgrep'
let g:unite_source_grep_default_opts =
\ '-i --exclude ''\.(git|svn|hg|bzr)'''
let g:unite_source_grep_recursive_opt = '-R'
endif
<
*unite-source-grep-git*
grep/git Nominates "git grep" command output at the current
working directory as candidates. This source require to be
executed on a git repository.
Note: This source requires |vimproc|. Please install.
http://github.com/Shougo/vimproc
Source arguments:
1. the target directories in the git repository splitted by
newlines. If the directory starts from "/", the "/" will
be substituted to the repository root path.
2. "git grep" options.
3. the narrowing pattern (if you omit it,
|unite-options-input| or input prompt is used).
Max candidates: 100
Special Target:
% : Current buffer name
# : Alternate buffer name
$buffers : All buffer names
/ : Git repository root
Example:
>
:Unite grep/git:/:--cached:file
<
*unite-source-vimgrep*
vimgrep Nominates |:vimgrep| command output as candidates.
This source is slower than |unite-source-grep|, but it can
recognize file encodings.
Note: The source clears quickfix list.
Source arguments:
1. the target directories splitted by newlines.
2. the narrowing pattern.
*unite-source-find*
find Nominates "find" command output as candidates.
Note: This source requires vimproc. Please install.
http://github.com/Shougo/vimproc
Note: Windows "find" command is not supported.
Please install UNIX Tools find for Windows.
Source arguments:
1. the target directories splitted by newlines.
2. "find" options.
*unite-source-line*
line Nominates current buffer lines as candidates.
Note: This source is created by t9md.
Note: In huge buffer (> 10000 lines), you must input narrowing
text.
Max candidates: 100
Source arguments:
1. the search direction:
"all": Search from buffer top
"forward": Search from the current to the buffer top
"backward": Search from the current to the buffer bottom
"buffers": Search from all buffers
"args": Search from argument buffers
Note: If the direction is "all" or omitted, it searches from
buffer top.
2. the wrap option. "wrap" or "nowrap". This is used when the
direction is "forward" or "backward". If it is omitted,
'wrapscan' option will be used.
Source custom options:
-custom-line-enable-highlight: enable buffer highlight
Example: >
nnoremap <silent> / :<C-u>Unite -buffer-name=search
\ line:forward -start-insert -no-quit<CR>
*unite-source-jump*
jump Nominates results of |:jumps| command as candidates.
*unite-source-change*
change Nominates results of |:changes| command as candidates.
*unite-source-jump_point*
jump_point Nominates current line of "file:line" format as candidates.
This source is useful for |vimshell| outputs.
*unite-source-file_point*
file_point Nominates filename or URI at the cursor as candidates.
This source is useful for |vimshell| outputs.
*unite-source-launcher*
launcher Nominates executable files from $PATH as candidates.
Source arguments:
1. comma separated executable files' path.
*unite-source-alias*
alias Creates alias source copied from original source.
This source is dummy. To create alias source, please refer to
|g:unite_source_alias_aliases|.
Note: This source is created by tacroe.
*unite-source-menu*
menu Nominates menus.
If arguments is not given, all menu names are nominated.
To create menus, please refer to
|g:unite_source_menu_menus|.
Source arguments:
1. menu name.
*unite-source-process*
process Nominates processes.
Note: This source is required "ps" command or "tasklist"
command(in Windows).
*unite-source-runtimepath*
runtimepath Nominates runtimepath directories.
*unite-source-script*
script Nominates the candidates generated by scripts.
You can create sources without Vim script.
The scripts output must be "word\tcommand" lines.
Note: If vimproc is available, it will use vimproc.
Sample scripts are available in:
https://github.com/hakobe/unite-script-examples
Source arguments:
1. script interpreter command.
2. script path (search from 'runtimepath').
>
:Unite script:perl:/path/to/bookmarks.pl
<
*unite-source-history/unite*
history/unite Nominates the history of the unite executions.
*unite-source-file_list*
file_list Nominates files in the filelist.
It is useful if you want to create filelist manually.
Source arguments:
1. filelist path(Required).
*unite-source-arg-!*
If argument 1 is "!", use the project directory instead of
the current directory. The project directory has ".git",
".svn", ".hg".
Further directories can be specified, eg: !/foo/bar
*unite-source-arg-?*
If argument 1 is "?", use the buffer directory instead of
the current directory.
Further directories can be specified, eg: ?/foo/bar
*unite-source-arg-?!*
If argument 1 is "?!", use the project directory searching
from the buffer directory instead of the current directory.
Further directories can be specified, eg: ?!/foo/bar
==============================================================================
KINDS *unite-kinds*
*unite-kind-common*
common A kind for common actions. Almost all kinds inherit this
common implicitly. This only requires word key.
Note: Interface kinds does not extend "common" kind.
*unite-kind-openable*
openable An interface that can open. This doesn't require any keys,
but a kind that inherits this requires open action.
Note: It doesn't extends "common" kind.
*unite-kind-cdable*
cdable An interface that can change the working directory.
Note: It doesn't extends "common" kind.
action__directory (String) (Optional)
The target directory.
*unite-kind-file_base*
file_base An interface for file operations.
Note: It doesn't extends "common" kind.
action__path (String) (Required)
The path of the target directory.
*unite-kind-file_vimfiler_base*
file_vimfiler_base
An interface for vimfiler file operations.
Note: It doesn't extends "common" kind.
action__path (String) (Required)
The path of the target directory.
*unite-kind-file*
file An interface for files. This kind inherits cdable, file_base,
file_vimfiler_base, uri and openable, so this requires kinds
that they require.
action__path (String) (Required)
The path of the target directory.
*unite-kind-buffer*
buffer An interface for buffers. This kind inherits file, so
this requires keys that it requires.
action__buffer_nr (String (Required)
The number of the target buffer.
*unite-kind-tab*
tab An interface for tabs. If you can use |gettabvar()|, since
this kind inherits cdable, this requires keys that those kind
require.
action__tab_nr (String) (Required)
The number of the tab.
*unite-kind-directory*
directory An interface for directories. This kind inherits file,
this requires keys it requires.
*unite-kind-word*
word A String that can be inserted.
word (String) (Required)
The string you want to insert.
*unite-kind-jump_list*
jump_list An interface for jumping to the file position. This kind
inherits openable, so this requires that it requires it.
Note: The action__path or action__buffer_nr is required.
action__path (String) (Required)
The path of the file that you'll jump into.
action__buffer_nr (String) (Required)
The buffer number of the buffer that you'll
jump into.
action__line (Number) (Optional)
The line number in the file you'll jump into.
action__col (Number) (Optional)
The column number in the file you'll jump
into.
action__col_pattern (String) (Optional)
The column search pattern in the file you'll
jump into.
action__pattern (String) (Optional)
The search pattern after the file is opened.
action__signature (String) (Optional)
In case you cannot assume the uniqueness of
where you'll jump into only by the pattern of
action__pattern and action__line, a unique
String to distinguish lines that match same
pattern.
About action__signature and calc_signature() function
A source which specifies action__signature must define
cals_signature() function for calculating the signature by the
line number of the buffer. calc_signature() receives {lnum}
as the first argument and returns a signature in String, where
{lnum} is a line number. jump_list compares signatures with
calling this function.
The below is an example.
>
function! s:source.calc_signature(lnum)
let range = 2
let from = max([1, a:lnum - range])
let to = min([a:lnum + range, line('$')])
return join(getline(from, to))
endfunction
<
*unite-kind-command*
command An interface for Ex commands of Vim.
action__command (String) (Required)
The command to run.
action__histadd (Number) (Optional)
If it is none zero, unite will add the execute
command to the history.
*unite-kind-window*
window An interface for Windows of Vim.
This kind inherits cdable, so this requires keys that it
requires.
action__window_nr (String) (Required)
The target window number.
*unite-kind-completion*
completion An interface for completion.
action__complete_word (String) (Required)
The completion word.
action__complete_pos (Number) (Required)
The completion position.
action__complete_info (String) (Optional)
The completion information.
*unite-kind-source*
source unite.vim source
If this kind candidate is executed, unite.vim starts unite
session in current unite buffer. When you close unite buffer,
sources are restored. So, unite.vim behaves like menu.
action__source_name (String) (Required)
The source name.
action__source_args (List) (Optional)
The source arguments.
*unite-kind-uri*
uri Files and protocols.
action__path (String) (Required)
The file uri.
If it is omitted, "action__path" is used.
*unite-kind-guicmd*
guicmd GUI executable commands.
action__path (String) (Required)
The command path.
action__args (List) (Optional)
The command args.
==============================================================================
FILTERS *unite-filters*
*unite-filter-matcher_default*
matcher_default
The default matcher with ["matcher_context"] set initially.
This can be changed by calling
|unite#filters#matcher_default#use()|.
*unite-filter-matcher_glob*
matcher_glob
A matcher which filters the candidates with user given
glob pattern. This recognizes "*" as wild card and "!" as
negative. Narrowing down can be done by word.
*unite-filter-matcher_regexp*
matcher_regexp
A matcher which filters the candidates with user given
regular expression. This recognizes "!" as negative.
Narrowing down can be done by word.
*unite-filter-matcher_fuzzy*
matcher_full_fuzzy
A matcher which filters the candidates with user given fuzzy
string.
This recognizes "!" as negative.
Narrowing down can be done by word.
Note: This matcher does not sort candidates. If you want to
use fuzzy sort, you can use |unite-filter-sorter_rank| or
|unite-filter-sorter_selecta|.
Note: The narrowing down might be slower if this matcher is
used.
Note: If the fuzzy string is longer than
|g:unite_matcher_fuzzy_max_input_length|,
this matcher falls back to |unite-filter-matcher_glob|.
This matcher may produce the best effect if set as
|unite-source-file_rec|.
>
call unite#custom#source('file,file/new,buffer,file_rec',
\ 'matchers', 'matcher_fuzzy')
<
*unite-filter-matcher_migemo*
matcher_migemo
For Japanese migemo filter.
>
call unite#custom#source('line', 'matchers', 'matcher_migemo')
<
*unite-filter-matcher_hide_hidden_files*
matcher_hide_hidden_files
Hide hidden files filter. If your input contains ".", hidden
files will be appeared.
*unite-filter-matcher_hide_current_file*
matcher_hide_current_file
Hide current editing file. >
call unite#custom#source(
\ 'file', 'matchers',
\ ['matcher_default', 'matcher_hide_hidden_files',
\ 'matcher_hide_current_file'])
*unite-filter-matcher_context*
matcher_context
A matcher which filters the candidates with user given glob
pattern or regexp pattern. In default, use glob pattern. If
the pattern starts "^", will use regexp pattern (head match).
Note: Created by hrsh7th.
*unite-filter-matcher_project_files*
matcher_project_files
Project files filter. It removes non project files.
Note: Requires "action__path" in candidates.
*unite-filter-matcher_project_ignore_files*
matcher_project_ignore_files
Project ignore files filter. It removes project ignore files.
It searches project ignore files from ".gitignore",
".hgignore", ".agignore" and ".uniteignore".
It does support whitelist feature(Ex: "!glob" pattern).
It uses same pattern as "ignore_globs".
Note: It does not support non glob ignore files in .hgignore.
Note: This feature is very slow. You should not use it in
large projects.
*unite-filter-sorter_default*
sorter_default
The default sorter ["sorter_nothing"] is set initially.
This default sorter can be changed by calling
|unite#filters#sorter_default#use()|.
*unite-filter-sorter_nothing*
sorter_nothing
Nothing sorter.
*unite-filter-sorter_word*
sorter_word
Compare word sorter.
*unite-filter-sorter_length*
sorter_length
Compare length sorter.
*unite-filter-sorter_ftime*
sorter_ftime
Compare |getftime()| sorter.
"action__path" or "action__directory" is need.
*unite-filter-sorter_rank*
sorter_rank
Matched rank order sorter. The higher the matched word is or
the longer the matched length is, the higher the rank is.
This sorter is useful for file candidate source.
Note: This sorter is slow.
>
call unite#custom#source('buffer,file,file_rec',
\ 'sorters', 'sorter_rank')
<
*unite-filter-sorter_selecta*
sorter_selecta
Another matched rank order sorter. Uses the scoring algorithm
from selecta: https://github.com/garybernhardt/selecta.
If the matched length is shorter, the rank is higher.
This sorter is useful for file candidate source.
Note: This sorter requires |:python| support.
>
call unite#custom#source('buffer,file,file_rec',
\ 'sorters', 'sorter_selecta')
<
*unite-filter-sorter_reverse*
sorter_reverse
Reverse order sorter.
*unite-filter-converter_default*
converter_default
The default converter ["converter_nothing"] is set initially.
This default converter can be changed by calling
|unite#filters#converter_default#use()|.
*unite-filter-converter_nothing*
converter_nothing
This converter is dummy.
*unite-filter-converter_relative_word*
converter_relative_word
A converter which converts a candidate's word into a
corresponding relative path.
Word can be used by matcher to narrow down the candidates and
must be set in precedence of the matcher.
If context information contains source__directory, this
converter uses it as the base path in relative path
conversion.
>
call unite#custom#source('file_rec', 'matchers',
\ ['converter_relative_word', 'matcher_default']),
<
*unite-filter-converter_relative_abbr*
converter_relative_abbr
A converter which converts a candidate's abbr into a
corresponding relative path.
Specification of this term is similar to
|unite-filter-converter_relative_word|.
*unite-filter-converter_abbr_word*
converter_abbr_word
A converter which converts a candidate's abbr into a word.
*unite-filter-converter_word_abbr*
converter_word_abbr
A converter which converts a candidate's word into a abbr.
*unite-filter-converter_tail*
converter_tail
A converter which converts a candidate's word into the
tail of the filename.
*unite-filter-converter_tail_abbr*
converter_tail_abbr
A converter which converts a candidate's abbr into the
tail of the filename.
*unite-filter-converter_file_directory*
converter_file_directory
A converter which separates the file and directory.
*unite-filter-converter_full_path*
converter_full_path
A converter which converts a candidate's word into the
full path of the filename.
*unite-filter-converter_smart_path*
converter_smart_path
A converter which converts a candidate's word into the
full path if you input full path.
*unite-filter-converter_uniq_word*
converter_uniq_word
A converter which converts a candidate's word into the
unique of the filenames.
==============================================================================
ACTIONS *unite-actions*
Actions of each kinds
common *unite-action-common*
Defines the common interface for all kinds. It uses candidate.word
internally.
nop Do nothing.
yank Yank the candidate "word" or "action__text".
yank_escape Yank the escaped candidate "word" or "action__text".
ex Input the escaped candidate text into command line.
insert Insert the candidate word or text before the cursor.
insert_directory
Insert the candidate directory before the cursor.
append Insert the candidate word or text after the cursor.
preview Preview the candidate text.
echo Echo candidates for debug.
openable *unite-action-openable*
Defines an interface for files that can be opened. It requires an inheriting
kind to define "open" action.
tabopen Open the file in a new tab.
choose Open the file in a selected window.
split Open the file, splitting horizontally.
vsplit Open the file, splitting vertically.
left Open the file in the left, splitting vertically.
right Open the file in the right, splitting vertically.
above Open the file in the top, splitting horizontally.
below Open the file in the bottom, splitting horizontally.
persist_open Open the file in alternate window. unite window
isn't closed.
tabsplit Open the files and vsplit in a new tab.
switch Open the file in current window or jump to existing
window/tabpage.
tabswitch Open the file in new tab or jump to existing
window/tabpage.
splitswitch Open the file in split window or jump to existing
window/tabpage.
vsplitswitch Open the file in vertical split window or jump to
existing window/tabpage.
cdable *unite-action-cdable*
Defines an interface for files you can move to with cd command.
cd Change the current directory.
lcd Change the current directory of the current window.
project_cd Look for the project directory, and change the
current directory to it.
tabnew_cd Open a new tab page and change the current
directory to it.
tabnew_lcd Open a new tab page and change the current
directory only for the tab.
narrow Narrow down candidates by the directory name.
Note: This action makes a temporary buffer. To leave
the temporary buffer directly, you must use
|<Plug>(unite_all_exit)|.
vimshell Run |vimshell| on the directory. This is available
only when |vimshell| is installed.
tabvimshell Run |:VimShellTab| on the directory. This is
available only when |vimshell| is installed.
vimfiler Run |vimfiler| on the directory. This is available
only when |vimfiler| is installed.
tabvimfiler Run |:VimFilerTab| on the directory. This is
available only when |vimfiler| is installed.
rec Run |unite-source-file_rec| on the directory.
rec_parent Run |unite-source-file_rec| on the parent directory.
rec_project Run |unite-source-file_rec| on the project directory.
rec/async Run |unite-source-file_rec/async| on the directory.
rec_parent/async
Run |unite-source-file_rec/async| on the parent
directory.
rec_project/async
Run |unite-source-file_rec/async| on the project
directory.
file Run |unite-source-file| on the directory.
file *unite-action-file*
Opens a file into a new buffer. This kind extends |unite-action-openable| and
|unite-action-cdable|.
open Open the file.
preview Open the file into the preview window.
bookmark Add the file into your bookmark.
mkdir Make the directory. If it already exists, this action
does nothing.
rename Change the file name.
exrename Batch rename selected files.
grep Grep the files.
wunix Write by unix fileformat.
read |:read| files. It is useful to insert template files.
diff diff with the other candidate or current buffer.
dirdiff |:DirDiff| with the other candidate.
(|DirDiff.vim| plugin is needed.)
backup Simple backup files.
argadd Add to the argument list.
buffer *unite-action-buffer*
This kind extends |unite-action-file|.
delete |:bdelete| the buffer.
fdelete |:bdelete|! the buffer.
wipeout |:bwipeout| the buffer.
unload |:bunload| the buffer.
bookmark Add the candidate into your bookmark.
rename Change the buffer name and the file name.
goto Go to the buffer tab.
tab *unite-action-tab*
This kind extends actions of |unite-action-cdable| only when |gettabvar()|
exists.
open Show the tab.
delete Close the tab.
The following actions require |gettabvar()| and t:cwd.
rename Change the title of the tab.
preview Preview the tab.
directory *unite-action-directory*
This kind extends actions of |unite-action-file|. This doesn't have any
additional actions. You may want to use this to change the default_action
when the target is a directory.
word *unite-action-word*
This kind doesn't have any additional actions. You may want to use this to
change the default_action when the target is a word.
jump_list *unite-action-jump_list*
This kind extends actions of |unite-action-openable|. Let me explain the
additional actions.
open Jump to the location of the candidate.
preview Preview around the location of the candidate.
highlight highlight the location of the candidate if the
corresponding buffer is visible.
replace Replace selected candidates with |qfreplace| plugin.
command *unite-action-command*
execute Execute the command.
edit Input the command into the command line.
grep Grep the command.
window *unite-action-window*
This kind extends actions of |unite-action-cdable| and
|unite-action-openable|.
jump Move to the window.
delete Close the window.
only Close all windows except the window.
preview Preview the window.
open Open the window buffer.
completion *unite-action-completion*
insert Insert the candidate.
preview Show the information of the candidate.
uri *unite-action-uri*
start Open uri by a web browser.
source *unite-action-source*
start Start the source.
edit Edit the source arguments.
Actions of each sources
bookmark *unite-action-source-bookmark*
delete Delete from bookmark file candidates.
register *unite-action-source-register*
edit Change a register value.
delete Clear registers.
process *unite-action-source-process*
sigterm Send SIGTERM to the process (default).
sigkill Send SIGKILL to the process.
sigint Send SIGINT to the process.
mapping *unite-action-source-mapping*
preview View the help documentation.
command *unite-action-source-command*
preview View the help documentation.
function *unite-action-source-function*
call Call the function and print result.
preview View the help documentation.
window/gui *unite-action-source-window/gui*
open Move to the window.
delete Close the window.
rename Change the title of the window.
*unite-action-history/unite*
history/unite
start Start the history.
Actions of each sources
*unite-default-action*
Default actions
kind action
{kind} {action}
---------- ----------
file open
buffer open
tab open
directory narrow
word insert
jump_list open
source start
==============================================================================
CREATE SOURCE *unite-create-source*
The files in autoload/unite/sources are automatically loaded and it
calls unite#sources#{source_name}#define() whose return value is the source.
Each return value can be a list so you can return an empty list to avoid
adding undesirable sources. To add your own sources dynamically, you can use
|unite#define_source()|.
Note: To optimize load source files, if "buffer/rec" source name is detected,
unite.vim loads "autoload/unite/sources/buffer*.vim" or
"autoload/unite/sources/rec*.vim" files. The source file name must have
source name prefix(Ex: buffer) or source name postfix(Ex: rec).
------------------------------------------------------------------------------
SOURCE ATTRIBUTES *unite-source-attributes*
*unite-source-attribute-name*
name String (Required)
The source name, which will be made available as
:Unite {name}
Name may contain only the following characters:
a-z
0-9
_
/
- (except the first character)
Good: "buffer", "file_mru", "view/git"
Bad: "BadOne", "!@#$%^&*()_[]{}-|", ""
*unite-source-attribute-gather_candidates*
gather_candidates Function (Required*)
* Unless some other attribute is explicitly
registered to gather the source candidates
This function is called once when the source in
initialized, and again whenever the user invokes
|<Plug>(unite_redraw)| to reload the source. If the
source is registered as
|unite-source-attribute-is_volatile|,
gather_candidates() is called on _every_ change of the
input string. This function takes {args} and {context}
as parameters and returns a {candidate} list. {args}
is a list of parameters passed to source via the
|:Unite| command. {context} is the context information
when the source is called.
{args} and {context} default to "" if they are not
provided, so gather_candidates() must handle that
See also:
|get()|
|unite-notation-{context}|
|unite-notation-{candidate}|
Unite caches the results of gather_candidates() until
the unite buffer is closed and is discarded (unless
you use |:UniteResume|). To cache persistently
regardless of the life of the unite buffer, a source
may implement logic to save the cache to disk.
*unite-source-attribute-change_candidates*
change_candidates Function (Optional)
This function is called if the input string is changed
while unite is gathering candidates.
change_candidates() generates new candidates
based on the changed input string. Unite adds these
candidates to the candidates cached from the initial
|unite-source-attribute-gather_candidates|.
This function takes {args} and {context} parameters
and returns a {candidate} list, as described in
|unite-source-attribute-gather_candidates|.
*unite-source-attribute-async_gather_candidates*
async_gather_candidates Function (Optional)
This function is called asynchronously to gather
candidates. You can use this function to split a
time-consuming job into smaller steps, to avoid
blocking the Vim UI.
|g:unite_update_time| is the default callback period.
This function takes {args} and {context} parameters
and returns a {candidate} list, as described in
|unite-source-attribute-gather_candidates|.
*unite-source-attribute-complete*
complete Function (Optional)
This function provides auto-completion at the command
line when the source is invoked via |:Unite| {source}.
This function takes {args}, {context}, {arglead},
{cmdline} and {cursorpos} parameters and returns
a {candidate} list.
*unite-source-attribute-hooks*
hooks Dictionary (Optional)
You may put hook functions in this dictionary in which
the key is the hook position (or priority) and the
value is the function to be called.
Unite provides the following hook functions:
on_init
*unite-source-attribute-hooks-on_init*
Called just before entering (or returning to) the
unite buffer (after executing |:Unite| or calling
|unite#start()|, but _not_ |:UniteResume|).
This function takes {args} and {context} parameters.
Note: if this function fails, it may prevent the unite
buffer from initializing.
on_syntax
*unite-source-attribute-hooks-on_syntax*
Performs highlight configuration for each source.
Called after the unite buffer is initialized and
syntax for each source is set but not called if
|unite-source-attribute-syntax| is not set.
This function takes {args} and {context} parameters.
Note: To get abbr head column, use:
unite#get_current_unite().abbr_head
Example: >
syntax match uniteSource__Buffer_Name
\ /[^/ \[\]]\+\s/
\ contained containedin=uniteSource__Buffer
highlight default linkage
\ uniteSource__Buffer_Name Function
<
Note you must set "contained in" to the same syntax
name as for |unite-source-attribute-syntax|.
on_close
*unite-source-attribute-hooks-on_close*
Called after executing |<Plug>(unite_exit)| or closing
the unite buffer following some command execution.
This function takes {args} and {context} parameters.
on_pre_filter
*unite-source-attribute-hooks-on_pre_filter*
Called before the filters to narrow down the
candidates.
This function takes {args} and {context} parameters.
on_post_filter
*unite-source-attribute-hooks-on_post_filter*
Called after the filters to narrow down the
candidates. Used to set attributes.
These filters are to avoid adversely affecting the
performance.
This function takes {args} and {context} parameters.
on_pre_init
*unite-source-attribute-hooks-on_pre_init*
Called before source is initialized.
{args} is empty.
Current source is set as `a:context.source` in
{context}.
You can dynamically initialize a source by changing
`a:context.source` in this function.
*unite-source-attribute-action_table*
action_table Dictionary (Optional)
Defines custom actions for the given source, for a
given "kind".
The dictionary key is the "kind" and the dictionary
value is the action table.
See |unite-kind-attribute-action_table| for the action
table structure.
Example:
>
'action_table' : { 'buffer' : foo_action_table }
<
foo_action_table is used for the "buffer" kind.
Use "*" for the key to match all kinds (useful if you
expect only one kind). If no key-value pair is set,
this dictionary is left empty.
An action table without a key defaults to "*".
For example, the following two are the same: >
'action_table' : foo_action_table
'action_table' : { '*' : foo_action_table }
<
*unite-source-attribute-default_action*
default_action Dictionary (Optional)
Specifies the default action for the source.
The dictionary key is the "kind" and the value is the
default action for that kind, for this source.
Without this, the kind's own default action is used.
The default action can be in string format and
it means the same as:
>
'default_action' : { '*' : action_name}.
<
*unite-source-attribute-default_kind*
default_kind String (Optional)
Default kind in the source candidates.
Without this, "common" is used.
*unite-source-attribute-alias_table*
alias_table Dictionary (Optional)
Defines custom aliases for the given source.
The dictionary key is the "kind" and the value is the
alias table. If the key is '*', it matches any kinds.
See |unite-kind-attribute-action_table| for the
specification of alias table.
If no key-value is set, this dictionary is left empty.
*unite-source-attribute-max_candidates*
max_candidates Number (Optional)
The maximum number of candidates.
Defaults to 0, which means no limit (infinity).
*unite-source-attribute-required_pattern_length*
required_pattern_length Number (Optional)
The minimum string length required for Unite to begin
narrowing candidates.
Defaults to 0, which means no minimum length (all
possible candidates are collected).
*unite-source-attribute-is_volatile*
is_volatile Number (Optional)
Whether the source recalculates the candidates
every time the input is changed.
Defaults to 0, which means candidates are cached by
Unite and |unite-source-attribute-gather_candidates|
will _not_ be called after the initial load (except
if the user explicitly invokes |<Plug>(unite_redraw)|
or if the Unite buffer is closed).
To cache longer, a source may implement its own
caching logic.
*unite-source-attribute-is_listed*
is_listed Number (Optional)
Whether the source name is visible to the user.
If the source is internal, it must be set to 0.
Defaults to 1.
*unite-source-attribute-description*
description String (Optional)
User-friendly description of the source.
Defaults to "".
*unite-source-attribute-syntax*
syntax String (Optional)
Syntax |group-name| used within the source buffer
(useful for highlighting).
If omitted, unite auto-generates a syntax group-name:
uniteSource__{source name}
The above naming convention is recommended to avoid
conflicts. Highlighting must be performed in this
hook: |unite-source-attribute-hooks-on_syntax|.
*unite-source-attribute-matchers*
matchers List/String (Optional)
List of matchers used by the source.
*unite-source-attribute-sorters*
sorters List/String (Optional)
List of sorters used by the source.
*unite-source-attribute-converters*
converters List/String (Optional)
List of converters used by the source.
*unite-source-attribute-source__*
source__ Unknown (Optional)
Defines custom attributes for a source. To avoid the
attribute from conflicting with unite, prefix all
custom attributes in your source with "source__".
NOTATION *unite-notation*
{context} *unite-notation-{context}*
A dictionary to give context information.
The following is the primary information.
The global context information can be acquired by
|unite#get_context()|.
The context information is characteristic to each
source and you can distinguish one by a key stored in
the dictionary.
input (String)
The input string of unite buffer.
buffer_name (String)
The name of unite buffer.
profile_name (String)
The profile name of unite buffer.
is_insert (Number)
If unite buffer is loaded from
insert mode.
immediately (Number)
If unite buffer is loaded from
|unite-options-immediately|.
is_redraw (Number)
If a user pressed |<Plug>(unite_redraw)| or
invalidated cache after executed actions.
Note: A user uses |<Plug>(unite_redraw)|
mapping to remove cache files.
is_invalidate (Number)
If An action disables a cache. This is also 1
in initialization of unite buffer.
is_async (Number)
If the source gathers candidates
asynchronously.
If it's set to 0 in a source, it disables
asynchronous.
source (Dictionary)
Gathering candidates source information.
candidates (List)
Filtered candidates.
Note: This key is valid only in
|unite-source-attribute-hooks-on_post_filter|.
source__{name} (Unknown) (Optional)
Additional source information.
Note: Recommend sources save variables instead
of s: variables.
custom__{name} (String) (Optional)
The source custom options.
Note: You can get "-custom-grep-command"
source custom option value by below script. >
get(a:context, "custom_grep_command", "")
<
{candidate} *unite-notation-{candidate}*
A dictionary for candidates.
The followings are the primary information.
word (String) (Required)
String Displayed in unite buffer.
Matcher to use word attribute to filter.
abbr (String) (Optional)
String Displayed in unite buffer.
If it is omitted, word attribute is used
instead.
The attribute is not used for matcher.
source (String) (Optional)
Generated candidate source name.
Note: This attribute is set automatically.
kind (String/List) (Optional)
The candidate kind name.
If it is omitted, "common" is used.
Kind name list is acceptable.
Ex: ["file", "directory"]
If you use list, you do not have to define the
parent's kind action.
Note: Unite searches kinds action from list
tail.
Ex: If you set kind attribute to ["file",
"command"], "file" (default) actions will be
overwritten by "command" action. You should
use source default action instead of kind.
is_dummy (Number) (Optional)
If the candidate is dummy.
The default value is 0.
Note: When the cursor moves, dummy candidates
are skipped.
is_matched (Number) (Optional)
If the candidate is filtered.
is_multiline (Number) (Optional)
If the candidates have multiple lines.
The default value is 0. When this is enabled,
unite splits abbr (or word if abbr is missing)
by a newline character.
source__{name} (Unknown) (Optional)
Attributes added by sources.
action__{name} (Unknown) (Optional)
Attributes added by actions.
For example, "action__path" attribute is file
path. If you learn standard action
attributes, please refer to |unite-kinds|.
==============================================================================
CREATE KIND *unite-create-kind*
The files in autoload/unite/kinds are automatically loaded and it calls
unite#kinds#{kind_name}#define() whose return value is the kind. Each return
value can be a list so you can return an empty list to avoid adding
undesirable kinds. To add your own kinds dynamically, you can use
|unite#define_kind()|.
Note: To optimize load kind files, if "foo" kind name is detected, unite.vim
loads "autoload/unite/kinds/foo*.vim" files. The kind file name must be kind
name prefix(Ex: foo).
------------------------------------------------------------------------------
KIND ATTRIBUTES *unite-kind-attributes*
*unite-kind-attribute-name*
name String (Required)
The name of a kind. It must consist of the
following characters:
a-z
0-9
_
/
- (except the first character)
Good: "buffer", "file_mru", "view/git"
Bad: "BadOne", "!@#$%^&*()_[]{}-|", ""
*unite-kind-attribute-default_action*
default_action String (Required)
Specify default action name when executing
|<Plug>(unite_do_default_action)|. If this attribute
is omitted, an error occurs. However, this hack is
used only in parent actions.
*unite-kind-attribute-action_table*
action_table Dictionary (Required)
Adds an action table unique to the kind. In this
dictionary, the key is the action name and the value
is one of dictionary attributes below.
If the value is "nop", the actions are disabled.
Note: "default" and "nop" names are keywords. You
cannot use them.
Note: If name is "unite__new_candidate", it will be
used for |<Plug>(unite_new_candidate)|. It adds a
candidate in the current source.
func (Function)
This function is called when executing
actions. This function takes {candidate}.
If "is_selectable" attribute is "1",
{candidate} are candidate list({candidates}).
Note: This {candidate} is cached by unite, so
you cannot modify it. If you modify it, you
must use |deepcopy()|.
description (String) (Optional)
The kind description string.
is_quit (Number) (Optional)
If this attribute is "1", unite buffer is
closed before executing actions. If this
attribute is omitted, "1" is used.
is_selectable (Number) (Optional)
If this attribute is "1", the action can
execute multiple candidates. If this
attribute is omitted, "0" is used.
is_invalidate_cache (Number) (Optional)
If this attribute is "1", unite invalidates
source cache when executing the action. If
this attribute is omitted, "0" is used.
is_listed (Number) (Optional)
If this attribute is "1", the action is listed
in |<Plug>(unite_choose_action)|. If this
attribute is omitted, "1" is used.
is_start (Number) (Optional)
If this attribute is "1", the action starts
unite sources. If this attribute is omitted,
"0" is used.
is_tab (Number) (Optional)
If this attribute is "1", the action opens a
new tabpage. If this attribute is omitted,
"0" is used.
*unite-kind-attribute-alias_table*
alias_table Dictionary (Optional)
Adds an alias table unique to the kind. In this
dictionary, the key is the action name and the value
is the overwrite action name.
If the value is "nop", the action is disabled.
*unite-kind-attribute-parents*
parents List (Optional)
Specify parent list. If this attribute is omitted,
["common"] is used.
Unite searches actions from list tail (head actions
are overwritten).
Note: Unite searches actions from parent list
recursively. You must check infinity loop.
------------------------------------------------------------------------------
IMPLICIT KIND *unite-implicit-kind-for-a-source*
Unite can define actions in implicit kind. The implicit kind name is
"source/{name}/{kind}". The {name} is source name. If the {kind} is "*", it
matches any kinds.
For example, if you want to add "delete" action in source "file", execute
below command.
>
call unite#custom#action('source/file/*', 'delete', function('...'))
<
------------------------------------------------------------------------------
ACTION RESOLUTION ORDER *unite-action-resolution-order*
For example, if you fire actions from kind "file" candidate gathered by source
"file", unite searches actions using the order below.
Note: kind "file" extends "openable" and "cdable" kind.
(1) Custom action table for kind "source/file/file".
(2) Default action table for kind "source/file/file".
(3) Custom action table for kind "source/file/*".
(4) Default action table for kind "source/file/*".
(5) Custom action table for kind "file".
(6) Default action table for kind "file".
(7) Custom action table for kind "cdable".
(8) Default action table for kind "cdable".
(9) Custom action table for kind "openable".
(10) Default action table for kind "openable".
(11) Custom action table for kind "common".
(12) Default action table for kind "common".
==============================================================================
CREATE FILTER *unite-create-filter*
The files in autoload/unite/filters are automatically loaded and it calls
unite#filters#{filter_name}#define() whose return value is the filter. Each
return value can be a list so you can return an empty list to avoid adding
an undesirable filter. To add your own filters dynamically, you can use
|unite#define_filter()|.
Note: To optimize load filter files, if "matcher_foo_bar" filter name is
detected, unite.vim loads "autoload/unite/filters/matcher_foo*.vim" files.
The filter file name must be filter name prefix(Ex: matcher_foo).
------------------------------------------------------------------------------
FILTER ATTRIBUTES *unite-filter-attributes*
*unite-filter-attribute-name*
name String (Required)
The filter name.
*unite-filter-attribute-filter*
filter Function (Required)
This function is called after gathering candidates by
unite.
This function takes {candidates} and {context} as its
parameter and returns a list of {candidate}.
The specification of the parameters and the returned
value is the same as for
|unite-source-attribute-gather_candidates|.
*unite-filter-attribute-description*
description String (Optional)
The filter description string.
*unite-filter-attribute-pattern*
pattern Function (Optional)
Returns highlight pattern for input.
Note: Only available for matchers.
==============================================================================
EXTERNAL SOURCES *unite-external-sources*
history/yank source:
https://github.com/Shougo/neoyank.vim
MRU sources:
https://github.com/Shougo/neomru.vim
tag source:
https://github.com/tsukkee/unite-tag
Quick Fix source:
https://github.com/osyo-manga/unite-quickfix
Outline source:
https://github.com/Shougo/unite-outline (newer)
https://github.com/h1mesuke/unite-outline (original)
Help source:
https://github.com/Shougo/unite-help (newer/vimproc required)
https://github.com/tsukkee/unite-help (original) >
" Execute help.
nnoremap <C-h> :<C-u>Unite -start-insert help<CR>
" Execute help by cursor keyword.
nnoremap <silent> g<C-h> :<C-u>UniteWithCursorWord help<CR>
BibBTex source:
https://github.com/termoshtt/unite-bibtex (faster, configurable)
https://github.com/msprev/unite-bibtex
Vim history sources:
https://github.com/thinca/vim-unite-history
And so on...
See Wiki page(Japanese).
https://github.com/Shougo/unite.vim/wiki/unite-plugins
==============================================================================
FAQ *unite-faq*
Q: I want to delete files in unite buffer.
A: You can use the setting below; however, this setting is dangerous. You may
delete files by mistake.
>
call unite#custom#alias('file', 'delete', 'vimfiler__delete')
<
Q: I want to input register values in insert mode.
A: You can use the mapping below.
>
inoremap <silent><expr> <C-z>
\ unite#start_complete('register', { 'input': unite#get_cur_text() })
<
Q: Unite.vim breaks Window layout after quitting unite buffer.
A: You MUST NOT |:quit| or |:close| to quit unite buffer.
You must use |<Plug>(unite_exit)| or |<Plug>(unite_all_exit)|.
Q: I want to exit unite buffer after narrowing action in a directory.
A: You should use |<Plug>(unite_all_exit)| instead of |<Plug>(unite_exit)|.
Q: How to make direct action (or choose action menu) to current file or given
path?
A: >
call unite#action#do_candidates('some_action',
\ unite#get_candidates([['file', expand('%')]]))
call unite#mappings#_choose_action(
\ unite#get_candidates([['file', expand('%')]]))
<
Q: unite.vim statusline conflicts with powerline.
https://github.com/Lokaltog/powerline
https://github.com/Lokaltog/vim-powerline (deprecated)
A: You must set |g:unite_force_overwrite_statusline| to 0.
>
let g:unite_force_overwrite_statusline = 0
<
Also, you must install the following custom theme for powerline.
For powerline:
1. vim powerline local themes
https://github.com/zhaocai/linepower.vim
2. or checkout the powerline branch from @zhaocai with the custom theme for
unite.vim included edition
https://github.com/zhaocai/powerline
https://github.com/Lokaltog/powerline/issues/470 (pull request)
For vim-powerline:
Note: The description is Japanese
http://d.hatena.ne.jp/osyo-manga/20130429/1367235332
https://github.com/osyo-manga/vim-powerline-unite-theme
Q: I want to match candidates by filename.
A: >
call unite#custom#source(
\ 'buffer,file_rec/async,file_rec', 'matchers',
\ ['converter_tail', 'matcher_default'])
call unite#custom#source(
\ 'file_rec/async,file_rec', 'converters',
\ ['converter_file_directory'])
<
Q: I want to use fuzzy match.
A: Yes you can use |unite-filter-matcher_fuzzy|.
>
call unite#custom#source('file,file/new,buffer,file_rec',
\ 'matchers', 'matcher_fuzzy')
<
Note: Fuzzy matcher does not sort candidates. If you want to sort by rank,
you can use "sorter_rank" or "sorter_selecta"; however, it is slow.
>
call unite#filters#sorter_default#use(['sorter_rank'])
<
Q: I want to clear cache in candidates.
A: Please use |<Plug>(unite_redraw)|.
Q: I want to narrow automatically when other candidates are selected in insert
mode like ctrlp.vim.
A: This feature is already implemented.
Note: Requires Vim 7.3.418 or above.
Q: I want to run "split" action in insert mode by "<C-s>".
A: >
autocmd FileType unite call s:unite_my_settings()
function! s:unite_my_settings()
" Overwrite settings.
imap <silent><buffer><expr> <C-s> unite#do_action('split')
endfunction
<
Q: Unite adds unite buffer to jumplist automatically.
https://github.com/Shougo/unite.vim/issues/278
A: You can use |unite-options-wipe| option. But if it is used, you cannot use
the |:UniteResume| feature.
Q: unite.vim is too slow.
A: Use Vim 7.3.885 or above with |if_lua| feature; unite.vim gets faster.
Q: Support for existing vim settings like Command-T plugin? Example,
'grepprg', 'suffixes'...
A: No. Because it is hard to implement and it may conflict with current unite
settings.
Q: I want the strength of the match to overpower the order in which I list
sources.
A: You should use |unite#custom#profile()|.
>
call unite#custom#profile('files', 'filters', 'sorter_rank')
<
Q: Some files are not showing up in file_rec(/async) candidates. What's up
with that?
A: You need to update the cache. Press |<Plug>(unite_redraw)| (<C-l>) when
unite is focused.
Q: I want to toggle some sources like ctrlp.
A: You can use |<Plug>(unite_rotate_next_source)|.
If you use ":Unite file buffer" command to create unite buffer, it changes
source candidates order.
Initial order: file,buffer
First rotate: buffer,file
Next rotate: file,buffer
Q: Unite.vim file_rec/async command is not executable in Windows environment.
http://stackoverflow.com/questions/18343579/unite-vim-file-rec-async-command-is-not-executable
A: In Windows, you should not use file_rec/async source. It is too slow and
not easy to use. You should use file_rec source instead.
Q: file_rec and file_rec/async cannot find all files.
https://github.com/Shougo/unite.vim/issues/356
https://github.com/Shougo/unite.vim/issues/370
https://github.com/Shougo/unite.vim/issues/459
A: It is a feature. cf: |g:unite_source_rec_max_cache_files|.
Also, the default max candidates are limited. You can customize it by
|unite#custom#source()|. >
let g:unite_source_rec_max_cache_files = 0
call unite#custom#source('file_rec,file_rec/async',
\ 'max_candidates', 0)
Also, you must clear previous cache in file_rec sources and wait until the
cache is completed.
In a directory including large file, making the cache is slow. Thus, I don't
recommend it.
To clear cache, you must execute |<Plug>(unite_redraw)| in unite
buffer (the default is mapped to <C-l>).
Note: |unite-options-sync| may be useful. It blocks Vim until the cache is
completed.
Q: file_rec/async source does not look .gitignore using ag.
https://github.com/Shougo/unite.vim/issues/398
A: It is a feature. file_rec/async does not ignore .gitignore files by
default. You must change |g:unite_source_rec_async_command| value and
re-create cache by |<Plug>(unite_redraw)| mapping.
Q: matcher_fuzzy not used by ":UniteWithBufferDir file" command.
https://github.com/Shougo/unite.vim/issues/418
Problem with ":Unite file_rec" with long input.
https://github.com/Shougo/unite.vim/issues/517
A: It is a feature. See |g:unite_matcher_fuzzy_max_input_length|.
Q: I don't want to get input lag like ctrlp.vim.
A: You can use |unite-options-sync|, but unite.vim may block your Vim for a
long time.
Q: Why did you split MRU sources?
A: Because of the following reasons.
1. You can now disable mru sources easily.
2. You can use other MRU plugins.
3. MRU features have overhead.
4. If you configure unite as being loaded lazily, mru sources cannot detect
opened files.
Q: Cannot open tilde in unite buffer.
https://github.com/Shougo/unite.vim/issues/512
A: To expand tilde, you must use "-profile-name=files". >
Unite -profile-name=files file
Q: Fuzzy matcher is not enabled in some sources.
https://github.com/Shougo/unite.vim/issues/588
A: For example, "grep" and "line" sources uses "matcher_regexp" matcher
instead of "matcher_default". So, you must change matchers manually. >
call unite#custom#source('grep', 'matchers', 'matcher_fuzzy')
Q: Unite does not respect 'splitright' option
https://github.com/Shougo/unite.vim/issues/615
A: >
call unite#custom#profile('default', 'context', {
\ 'prompt_direction': 'top'
\ })
Q: I want to use file_rec/async in Windows environment.
A: You can use "files" command. It is slower than find command, however, it
is useful in Windows environment.
https://github.com/mattn/files >
let g:unite_source_rec_async_command = 'files -A'
Q: I want to change buffer source output format.
A: The option is nothing. You should use converter feature.
https://github.com/Shougo/unite.vim/issues/412
Q: I want to change statusline highlights.
A: You can change below highlights by |:highlight|.
"uniteStatusNormal", "uniteStatusHead"
"uniteStatusSourceNames", "uniteStatusSourceCandidates"
"uniteStatusMessage", "uniteStatusLineNR"
Q: "ag" does not work in grep source.
A: Please check |unite-source-grep| example.
Q: How can I specify source args split by newlines for grep or file_rec
sources?
A: You can use eval arguments feature.
>
Unite grep:`=glob('/dir1/*.txt')."\n".glob('/dir2/*.txt')`
<
Q: Unite's cursor does not move to prompt line automatically.
A: You can use |unite-options-prompt-focus| option for it.
Q: I want to specify file pattern in grep source.
A: You cannot. Because original grep does not support the feature.
But if you use "ag" command, you can use it like below. >
Unite grep::-G\ \\.txt$
Q: I want to change "file_rec" source highlight.
A: >
function! s:rec_on_syntax(args, context)
syntax match uniteSource__FileRecFileName /\[.\+\]/ contained
\ containedin=uniteSource__FileRec
highlight default link uniteSource__FileRecFileName Type
endfunction
call unite#custom#source('file_rec', 'syntax',
\ 'uniteSource__FileRec')
call unite#custom#source('file_rec', 'on_syntax',
\ function('s:rec_on_syntax'))
<
==============================================================================
vim:tw=78:ts=8:ft=help:norl:noet:fen: